Alco-Sensor IV for DOT Testing SKU: 206-BLUE
Alco-Sensor IV for DOT Testing SKU: 206-BLUE
The Alco-Sensor IV for DOT testing and non-regulated workplace testing is the most economical device, and is:
Approved by the U.S. DOT as an evidential breath alcohol testing device
Great for Regulated and Non-Regulated workplace testing programs
Evidential accuracy exceeds +/- .005 at .100 BrAC
LED display prompts the operator through a DOT testing sequence, greatly reducing operator error
Automatic breath sampling triggers when the subject delivers a continuous deep lung breath sample
Device is engineered with manual breath sampling capabilities for subjects with shy lung or uncooperative subjects
Can be used as an alcohol screening device
Able to connect to the RBT IV printer or to a computer running the Alco-Sensor IV @ Work Software
When connected to the RBT IV printer, the Alco-Sensor IV will conduct a confirmation test following the :15 wait countdown period and print both screening and confirmation test results
Test results display in seconds
Two year factory warranty
Alco-Sensor IV for DOT Testing SKU: 206-BLUE
| Alco-Sensor IV for DOT Testing SKU: 206-BLUE Specifications | |
| Sensor type | Electrochemical Oxidation (fuel cell) |
| Range of measurement | .000 – .400 BrAC |
| Accuracy and precision | U.S. DOT approved for evidential use |
| Breath sampling | Automatic with manual override |
| Response time | 5 – 10 seconds negative results, 10 – 30 seconds positive results |
| Power requirement | 9-volt battery (included) |
| Test mode | Direct |
| Calibration | Microprocessor controlled, using gas or wet bath simulator |
| Memory | Last test |
| Print capability | Yes, with RBT IV Blue Dot printer |
| Computer capability | Yes, blue dot version only, Alco-Sensor IV @ Work software |
| Temperature range | 0 – 40 degrees C |
| Size | 3 x 5 x 1 , 11 oz. |
| Warranty | Two years parts and labor |
Sản phẩm tương tự
Alco-Sensor IV with Memory System for DOT Testing
The Alco-Sensor IV with Memory System for DOT Testing Nylon case SKU: 227-P-S is an economical and portable breath testing system, and is:
Approved by the U.S. DOT as an evidential breath alcohol testing device
Great for Regulated and Non-Regulated workplace testing programs
Evidential accuracy exceeds +/- .005 at .100 BrAC
LED display prompts the operator through the DOT testing sequence, greatly reducing operator error
Automatic and manual breath sampling for greater precision
Automatic 15-minute wait period countdown following a positive screening test result of .020 or greater
Automatically begins a confirmation test following the 15 minute wait period
All-weather, nylon carry case allows operator to transport the device
Stores over 70 test results in memory
Connects to a battery operated Martel Thermal Printer for smudge free print results
Each test record prints the device serial number, test number, date and time of test as well as a line for the operator’s signature to document chain of custody of test results
Computer capable: Total Recall software facilitates uploading test results to a computer and generates customized reports from a database of test results
One year factory warranty
We are the only company authorized to provide technical support and repair services…so you get continued support well after the sale.
Alco-Sensor RBT IV for DOT Testing
The Intoximeters Alco-Sensor RBT IV for DOT testing is the most widely used instrument available and is ideal for workplace alcohol testing programs.
Approved by the U.S. DOT as an Evidential breath alcohol tester
Great for Regulated and Non-Regulated workplace testing programs
Evidential accuracy exceeds +/- .005 at .100 BrAC
Lightweight and portable for on-site testing
Easy, straight-forward test protocol with no unnecessary data input make for a faster testing sequence
Exceptional accuracy and durability
The hand-held Alco-Sensor IV connects to the battery-powered RBT IV printer to produce a totally portable DOT-compliant alcohol testing system
Alco-Sensor IV and RBT IV printer displays prompt the operator through a DOT test procedure, reducing operator error
A Screening test of .020 or greater triggers an automatic 15-minute countdown on the RBT IV printer display
Following a positive Confirmation test of .020 or greater, the RBT IV printer further prompts the operator to perform an Accuracy Check
RBT IV printer function keys start common testing procedures by pressing a single button: Screening test, Confirmation test, Calibration Adjustment, and Accuracy Check.
Automatic and manual breath sampling capability
Waterproof Pelican case protects the instrument and printer from extreme weather and rough treatment
A 12 volt rechargeable battery powers the RBT IV printer and maintains its charge for up to 50 tests
Printer cables and battery connections are secured under the foam cut outs within the case
RBT IV printer prints results on tamper evident printer paper or 3-ply paper
Easily and quickly conduct monthly Accuracy Checks and, if needed, Calibration Adjustments
Alco-Sensor IV with Memory System for DOT Testing
The Alco-Sensor IV with Memory system for DOT and non-regulated workplace testing programs is an economical and portable breathalyzer, and is:
Approved by the U.S. DOT as an evidential breath alcohol testing device
Evidential accuracy exceeds +/- .005 at .100 BrAC
Great for Regulated and Non-Regulated workplace testing programs
LED display prompts the operator through a DOT testing sequence, greatly reducing operator error
Automatic and manual breath sampling for greater precision
Automatic 15-minute wait period countdown following a positive screening test result of .020 or greater
Portable breath alcohol testing system
Stores over 70 test results in memory
Connects to a rechargeable battery operated Martel Thermal Printer for smudge free print results
Each test record prints the device serial number, test number, date and time of test as well as a line for the operator’s signature to document chain of custody of test results
Computer capable: Total Recall software facilitates uploading test results to a computer and generates customized reports from a database of test results
Two year factory warranty
We are the only company authorized to provide technical support and repair services…so you get continued support long after the sale.
Alco-Sensor RBT V Data Lite System
The Alco-Sensor RBT V Data Lite system is an economical and portable breath alcohol testing device from Intoximeters. This system is programmed with a DOT Quick Test protocol which captures minimal subject testing data, quickly guiding the operator through a test sequence. The full keyboard makes data entry fast and easy. The system includes a NRC testing protocol that can be selected from the main menu.
Approved by the U.S. DOT as an evidential breath alcohol testing device
Great for Regulated and Non-Regulated workplace testing programs
Programmed with DOT and NRC testing protocols
Evidential accuracy exceeds +/- .005 at .100 BrAC
Easy to read prompts guide the operator through the testing sequence, greatly reducing operator errors
Intuitive menus gives the operator quick access to DOT quick test protocols and multiple features
Automatic and manual breath sampling capability
Keyboard allows operator to input Donor’s name and ID number
Automatically initiates a :15 wait period following a positive screening test of .02
Automatically initiates a confirmation test following the :15 wait period
Hundreds of tests can be stored and printed in the device’s memory
The Martel thermal printer prints results without the mess of ink printers
Operates independently of the Martel thermal printer, allowing the operator to test the subject without being tethered to the printer
Operator places the Alco-Sensor VXL into the docking station to quickly print test results. This fail-safe printing method removes any question about the integrity of the printed test result, and removes the issues that sometimes arise with wireless communication technology
Đánh giá
Chưa có đánh giá nào.