METAL DETECTION FOR FORESTRY AND SAWMILLS METAL SHARK® OCTA
[button link=”https://drive.google.com/file/d/15w4V_2y1W2CO0PSFPNBXqUt865Q2KS0E/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Optimally adapted to the monitoring of entire tree trunks
Sensor diameter up to 1.8 m (further sizes on request)
Sturdy stainless steel design: particularly robust and with short metal-free zone
Maintenance-free with automatic balance and calibration control
Sturdy stainless steel design: particularly robust and with short metal-free zone
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Features
Sensor diameter up to 1.8 m (further sizes on request)
Robust against environmental influences such as high and low temperatures
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Easy to use with intuitive and multilingual menus
Memory for up to 250 products
Maintenance-free with Autocalibration
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
4-level password system, automatic log out after time lapse
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® OCTA has been developed for industrial applications in the timber industry and sawmills. It detects magnetic and non-magnetic metal contaminants (iron, tombac, brass, stainless steel, etc.) precisely and reliably even under difficult conditions.
The octagonal shape makes it ideal for monitoring logs for metal parts such as shrapnel, bullet fragments, nails, screws, etc.
It is typically installed in troughed conveyor belts.
Accessories & Extras
The METAL SHARK® OCTA can be perfectly adapted to your production by various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
Specifications
Electronics | Digital signal processor, digital frequency generation, digital balance control, automatic calibration, digital noise filters, integrated flexible control functions |
Input | 2 analog 0…10 VDC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons |
Output | 2 floating: “error” and “metal” 8 freely configurable 24 V DC signals |
Inspection method | High-frequency magnetic field, multi-channel operation, balanced receiver coils |
Metal detection | Ferrous, non-ferrous (e.g. tombac, brass, bronze, aluminium, lead etc.) and stainless steel |
Product compensation | Memory for up to 250 products, automatic product compensation, with TeachAssistent |
Encclosure rating | IP 65 |
Environmental conditions | standard: -20°C to +40°C / -4°F to 104°F, rel. humidity 30% up to 80% (non-condensing) optionally: -40°C / -40°F or +55°C / 131°F |
Temperature of goods inspected | up to 70°C / 158°F |
Power supply | One phase 110-240 VAC, 50/60 Hz, typ. consumption 20 W (max. 60 W) |
Interface | RS232, LAN (optional, für SHARKNET®), USB (optional) |
Maintenance | Maintenance-free, selfcalibrating sensors |
Diagnostics | Integrated diagnostic software, automatic self-test |
SHARKNET® | The SHARKNET® software connects METAL SHARK® metal detectors with a central computer, providing centralized storage of all operating data plus batch and alarm documentation for HACCP and IFS compliance. |
Fast Power Drive (FPD) | Significantly improves metal detection and reliability in industrial environments that do not meet the standards for electromagnetic compatibility. Various IP protection classes possible, ATEX Zone 22 possible. |
Super Power Drive (SPD) | Improves metal detection by -0.5 to -1 mm in industrial environments that do not meet electromagnetic compatibility standards, with different IP protection classes and ATEX Zone 22 possible. |
Temperature extension (cold) | Temperature range extended to -40°C / -40°F, resin seals remain elastic at low temperatures. Special insulation, heated enclosure and other features. |
Temperature extension (hot) | Temperature range extended to +55°C / +131°F, adapted enclosure, additional thermal insulation, replaceable filter fan, heat exchanger and/or active cooling units. |
Signalling devices (optical/acoustic) | Stacking lights and signal horns/sirens available in different versions and IP protection classes. |
Sản phẩm tương tự
[button link=”https://drive.google.com/file/d/1NVMEb_pzVHepcMp42byKw-ntmWa_FuPw/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metal contaminants in liquid and pasty products
Easy to integrate into common pipeline systems, diameter from 1“–6“ / 25-150 mm
Stainless steel housing and frame are easy to clean, supplied tube is CIP-capable (Cleaning In Place)
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation through autocalibration and TeachAsssistant
Function
The METAL SHARK® IN Liquid is developed for liquid and pasty products. With its maintenance-free design and high-quality, hygienic construction, the metal detector is ideal for reliable use in the food industry.
METAL SHARK® IN Liquid can be easily integrated into all common piping systems for pumps, vacuum fillers or even sausage meat filling plants.
Three different valve models, optimally adapted to the respective product, guarantee a safe discharge of metallic contaminants.
[button link=”https://drive.google.com/file/d/1R13G-pezDuiVPu_ybIMzoqdrX2Sm22sP/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metals in raw or frozen meat in standardized E2 boxes
Especially high sensitivity with moist or frozen products with 3D detection
Easy setup and intuitive operation with Autocalibration and TeachAssistant
Maintenance-free design with automatic and continuous calibration of detector coils
BRC-Kit option: Conformity with the Global Standard of the British Retail Consortium (BRC) for food safety
[button link=”https://drive.google.com/file/d/1CfN0n6N2gAYLPOIjpp5Q_ZFbII4yZMu7/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metals in packaged and unpackaged products on conveyor belts
Removable sides make it particularly easy to install, ideal for conveyors that cannot be split
Highest sensitivity with 4-quadrant technology
Autocalibration and TeachAssistant for intuitive control and easy setup
Maintenance-free due to automatic balance and calibration control
Function
Metal detector METAL SHARK® TU is used in combination with conveyor belts or chutes when they cannot be divided or dismantled. The sidewalls of the TU can be removed so that the sensor plates can be easily pushed over and under the belt.
Thanks to its 4-quadrant technology, it detects magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminum etc.) precisely and reliably. The robust stainless steel housing is easy to clean and robust and therefore suitable for many industries.
[button link=”https://drive.google.com/file/d/1VsV1-_LD80DdyLconHkAk96eVwsQMIPo/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Monitors bulk materials in the building materials industry or mining
Self-adjusting and extremely easy to install
High-quality components ensure reliability and long service life
Detects ferrous and non-ferrous metals, iron oxide and ore are ignored
Probe and amplifier are immune to vibration and resistant to weather, dirt and stone chips
Particularly robust and easy to clean
Features
Good sensitivity (M10 nuts) at belt speed of 0.3 – 6 m/s
Very simple operation
Can be used close to frequency conver-ters, only 2 m minimum distance between probe and motors or magnets
Belt widths from 500 mm to 2,000 mm
Monitoring and display of internal para-meters
Optional: Realization as tandem for higher debris heights
Optional: complete suppression of magnetite Fe3O4
Function
The QLC and QLCTA metal detectors offer good metal sensitivity for monitoring bulk materials in the mining and construction materials industry.
At a belt speed of 0.3 – 6.0 m/s they easily detect metal parts of the size of about M10 nuts and larger.
For higher sensitivity (M6 nuts) at a belt speed of max. 4.0 m/s we recommend the metal detectors SQ and SQTA.
Đánh giá
Chưa có đánh giá nào.