METAL DETECTOR FOR LARGE PRODUCTS METAL SHARK® BIG
[button link=”https://drive.google.com/file/d/1vNrtKa6nE96FePk8Lai_RDHN4LDM0NyC/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Sturdy aluminium design – particularly robust and weatherproof with short metal-free zone
Ideal protection for hackers and OSB flakers
High search performance and noise immunity through 4-quadrant technology, even better with Power Drive option
Maintenance-free: automatic calibration and automatic balance control
Easy installation and intuitive operation
Remote control and remote maintenance (option SHARKNET®) with documentation of all settings, metal messages etc.
Features
Aperture width standard up to 2 m x 1.6 m (other sizes on request)
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Easy setup with TeachAssistant
Easy to use with intuitive and multilingual menus
Memory for up to 250 products
Documentation of all events and metal messages
Remote control and remote maintenance via the company network using SHARKNET® software (option)
Extended temperature range down to -40°C / -40°F with specially adapted sensor and specially equipped control unit (option)
4-level password system, automatic logoff after time lapseFunction
The METAL SHARK® BIG with rectangular opening is specially designed for large products such as logs, bales or recycled wood. It detects iron, stainless steel, aluminium etc. precisely and reliably even under difficult conditions.
Thanks to its robust design, it is particularly suitable for industrial use on rough terrain. The typical installation is in a trough conveyor with flat belt, or in a specially prepared vibratory conveyor.
Accessories & Extras
The METAL SHARK® BIG can be perfectly adapted to your production with various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
| Electronics | Digital signal processor, digital frequency generation, digital balance control, automatic calibration, digital noise filters, integrated flexible control functions |
| Input | 2 analog 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons |
| Output | 2 floating: “error” and “metal” 8 freely configurable 24 V DC signals, e.g. solenoid valve, optical/acoustic alarm |
| Inspection method | High-frequency magnetic field, multi-channel operation, balanced receiver coils |
| Metal detection | Ferrous, non-ferrous (e.g. tombac, brass, bronze, aluminium, lead etc.) and stainless steel |
| Product compensation | 250 memory locations, automatic product compensation, with TeachAssistant |
| Enclosure rating | IP 65 |
| Environmental conditions | -30°C to +40°C / -22°F to +104°F (UL version: -20°C to +40°C / -4°F to +104°F) option: to -40°C / -40°F or +55°C / +131°F, rel. humidity 20% to 90% non-condensing; >95% relative humidity (condensing) with closed switch cabinet |
| Product Temerature | up to 70°C / 158°F |
| Power Supply | 1 phase 110-230 V AC +/- 5% 20 W typ. (60 W max.) |
| Interface | RS232, LAN (optional, for SHARKNET®), USB (optional) |
| Maintenance | Maintenance-free, sensors calibrate themselves |
| Diagnostics | Integrated diagnostic software, automatic self-test |
| Fast Power Drive (FPD) | Improves metal detection and reliability in industrial environments that do not meet electromagnetic compatibility standards, various IP protection classes possible, ATEX Zone 22 possible. |
| SHARKNET® | The SHARKNET® software connects METAL SHARK® metal detectors to a central computer and offers central storage of all operating data as well as batch and alarm documentation and remote control and remote maintenance from a PC. |
| Temperature extension (cold) | Temperature range extended to -40°C / -40°F, resin seals remain elastic at low temperatures. Special insulation, heated enclosure and other features. |
| Temperature extension (hot) | Temperature range extended to +55°C / +131°F, adapted enclosure, additional thermal insulation, replaceable filter fan, heat exchanger and/or active cooling units. |
| Signalling devices (optical/acoustic) | Stacking lights and signal horns/sirens available in different versions and IP protection classes. |
Sản phẩm tương tự
[button link=”https://drive.google.com/file/d/18_DGS4a1ycGbmUVWt3pCA7VU7cg_NZ39/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Precise metal detection due to multi-segment sensor for particularly flat products
Highest sensitivity through 4-quadrant technology
Rotating sensor traverse adapts perfectly even to vertical or inclined product flow
Freely selectable widths up to 7 m and more
Intuitive control and easy installation with auto-calibration and TeachAssistant
Maintenance-free due to automatic balance and calibration control
Features
Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Detects iron from 0.5 mm and stainless steel from 0.9 mm with its position in a defined area of the fabric
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® COMBI is a rotatable multi-segment sensor that is typically used over very flat products such as fiber wood, plastic boards, fabric or nonwoven, paper or plastic webs.
It detects the smallest metal particles from 0.5 mm and locates their position in defined segments of the fabric.
The METAL SHARK® COMBI is available for widths up to 7,000 mm and more. It can also be operated without problems in humid workplaces with ambient temperatures from -10˚C to +40˚C and product temperatures up to 90°C.
Accessories & Extras
The METAL SHARK® COMBI can be perfectly adapted to your production by various special designs and accessories. Different numbers of sensor plates and widths um to 7,000 mm are possible as well as swiveling traverse arms or an adjustable travrse height.
For your audit reliability, a Performance Verification Certificate can be issued by CASSEL service technicians during commissioning or maintenance.
[button link=”https://drive.google.com/file/d/1b7OBWPwwl17y7OM3o7M1bFgPnmPcKDH9/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Specially designed for the monitoring of wood, fibre boards or any wide but thin product
AutoSens technology for automatic adjustment of the sensitivity to the mat height
Maintenance-free with automatic balance and calibration control
Durable aluminium design: particularly robust and easy to clean
Highest sensitivity with 4-quadrant technology
Autocalibration and Teach Assistant for intuitive control and easy installation
Features
Aperture widths from 1 m to 5 m as a standard (further sizes on request)
Maximum search performance with hig-hest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Easy to use with intuitive and multilingu-al menus
Memory for up to 250 products
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® BIG pba with rectangular opening at a rather low opening height is especially designed for monitoring fibre mats, MDF, OSC or chipboard as well as other panel materials.
The typical installation takes place around a conveyor belt with flat belt.
Using 3D detection technology, it detects magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminium etc.) precisely and reliably even under difficult conditions.
Accessories & Extras
The METAL SHARK® BIG pba can be perfectly adapted to your production with various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”#” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]Replace This Text[/button]
Modular conveyor HQ – optimally adapted to use with metal detector METAL SHARK® BD
100% stainless steel – stable construction and easy to clean
Different belt types and various ejection systems for every application, FDA compliant and heat resistant up to 120° C
Accessories such as railing, lights, covers, light sensors can be added individually
BRC-Kit: Conformity with all current standards for machines in the food industry
Function
The HQ conveyor belts are combined with METAL SHARK® BD metal detectors and are mainly adapted to the requirements of the food industry.
The white PU belt is FDA compliant and can be removed in just a few steps. The belt and the stable stainless steel frame can be cleaned easily and quickly and thoroughly.
HQ is a modular system witk a huge variaty of belt types an sizes, rejection systems, railings or coverages.
[button link=”https://drive.google.com/file/d/1AKd8ERvxZCLhwYOpQy1yeVZF2EPBv6rl/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably finds metal contaminants in sausage meat
Easy to integrate into all common piping systems
Stainless steel housing and frame are robust and easy to clean – ideal for the meat industry
Highest sensitivity with 4-quadrant technology
Autocalibration and Teach Assistant for intuitive control and easy installation
for use with twist-off devices, for clippers please use the IN Meat
Features
Maximum detection performance with the highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with Teach Assistant
Storage spaces for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Easy to fit into common pipelines
CIP-fähig (Cleaning In Place)
Documentation of all events and metal messages
IFS and HACCP reports available on the display at the touch of a button
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
Compact metal detector for sausage filling machines and sausage meat with the mobile base frame on wheels. The stand with integrated gas spring offers easy height adjustment from 85 to 120 cm height.
The METAL SHARK® INA Meat can be used universally with twisting devices and automatic clip machines. In the twist-off mode, the foreign device cable is simply plugged into the foreign device socket on the filling machine. For automatic clip machines or automatic hanging lines, the foreign device cable is inserted into the existing cable between the filling machine and the clip or hanging machine. Plug and socket types are supplied to match the filling machine type.
The device is easy to clean and complies with the FDA standard.
Đánh giá
Chưa có đánh giá nào.