Bơm Màng Wilden PX1510
| Model sản phẩm: | PX1510 |
| Nhà sản xuất: | Wilden |
| Xuất xứ: | Trung Quốc |
| Lưu lượng: | 1060 lít/phút |
| Cột áp: | 8,6 bar |
| Vật liệu: | nhôm, inox, gang / Neo, Buna, Teflon, Santo |
| Size: | 3″ (inch) |
BƠM MÀNG WILDEN – MODEL PX1510 VẬT LIỆU KIM LOẠI.
Cấu Tạo: gồm 2 phần chính.
– Motor khí: gồm bộ chia khí, van khí, thanh dẫn, gioăng..
– Bộ phận bơm: gồm màng bơm thân bơm, bi, van…
Nguyên lý hoạt động:
– Hoạt động trên nguyên tắc thay đổi thể tích trong buồng bơm tạo áp suất chênh hút chất lỏng và đẩy ra đường ống.
– Vận hành bằng khí nén không dùng điện.
Ưu điểm:
– Nhỏ gọn, hiệu quả kinh tế.
– Phòng chống cháy nổ.
– Có nhiều loại vật liệu nên bơm được các loại hóa chất, dung dịch ăn mòn..
Thông số kỹ thuật:
– Lưu lượng: 1-1060 lit/min
– Áp suất: 8,6 bar
– Vật liệu thân nhôm, thân inox, thân gang, màng Neo+Buna+Teflon+Santo
Đường hiệu suất:
Đường đặc tính bơm màng Wilden PX1510
Ứng dụng:
–Bơm bùn, bơm bột giấy, bơm bột, bơm thực phẩm…
Bơm nước, bơm bùn, bơm hóa chất trong hầm mỏ.
– Bơm xăng dầu, bơm axit…
Sản phẩm tương tự
Bơm màng Wilden H38 3200D
This double-action piston pump creates approximately a 26:1 pressure ratio of discharge fluid pressure to inlet air supply to generate up to 220.6 bar (3,200 psig). The R.038/3200D is the cost-effective solution for many applications that require discharge pressures greater than the 1:1 pressure ratio that is traditionally offered from most AODD pumps.
FLOW RATE TO 7.6 LPM (2 GPM)
MAX INLET AIR PRESSURE = 8.6 (BAR 125 PSI)
MAX DISCHARGE PRESSURE 220.6 Bar (3,200psi)
WETTED HOUSINGS
(Water Chambers and Manifolds)
| Material | Ship Wt |
| Aluminum | 16 kg (36 lbs) |
NON-WETTED HOUSINGS
| Description | Material |
| Center Section | Aluminum |
| Air Valve | Polypropylene |
| Temperature Limits | |
| Operation | 12.2°C to 65.6°C (10°F – 150°F) |
MAXIMUM SUCTION LIFT CAPABILITY
7.1 m Dry (23.2′)
ơm màng Wilden H38 3200D
This double-action piston pump creates approximately a 26:1 pressure ratio of discharge fluid pressure to inlet air supply to generate up to 220.6 bar (3,200 psig). The R.038/3200D is the cost-effective solution for many applications that require discharge pressures greater than the 1:1 pressure ratio that is traditionally offered from most AODD pumps.
FLOW RATE TO 7.6 LPM (2 GPM)
MAX INLET AIR PRESSURE = 8.6 (BAR 125 PSI)
MAX DISCHARGE PRESSURE 220.6 Bar (3,200psi)
WETTED HOUSINGS
(Water Chambers and Manifolds)
| Material | Ship Wt |
| Aluminum | 16 kg (36 lbs) |
NON-WETTED HOUSINGS
| Description | Material |
| Center Section | Aluminum |
| Air Valve | Polypropylene |
| Temperature Limits | |
| Operation | 12.2°C to 65.6°C (10°F – 150°F) |
MAXIMUM SUCTION LIFT CAPABILITY
7.1 m Dry (23.2′)
ơm màng Wilden H38 3200D
This double-action piston pump creates approximately a 26:1 pressure ratio of discharge fluid pressure to inlet air supply to generate up to 220.6 bar (3,200 psig). The R.038/3200D is the cost-effective solution for many applications that require discharge pressures greater than the 1:1 pressure ratio that is traditionally offered from most AODD pumps.
FLOW RATE TO 7.6 LPM (2 GPM)
MAX INLET AIR PRESSURE = 8.6 (BAR 125 PSI)
MAX DISCHARGE PRESSURE 220.6 Bar (3,200psi)
WETTED HOUSINGS
(Water Chambers and Manifolds)
| Material | Ship Wt |
| Aluminum | 16 kg (36 lbs) |
NON-WETTED HOUSINGS
| Description | Material |
| Center Section | Aluminum |
| Air Valve | Polypropylene |
| Temperature Limits | |
| Operation | 12.2°C to 65.6°C (10°F – 150°F) |
MAXIMUM SUCTION LIFT CAPABILITY
7.1 m Dry (23.2′)
ơm màng Wilden H38 3200D
This double-action piston pump creates approximately a 26:1 pressure ratio of discharge fluid pressure to inlet air supply to generate up to 220.6 bar (3,200 psig). The R.038/3200D is the cost-effective solution for many applications that require discharge pressures greater than the 1:1 pressure ratio that is traditionally offered from most AODD pumps.
FLOW RATE TO 7.6 LPM (2 GPM)
MAX INLET AIR PRESSURE = 8.6 (BAR 125 PSI)
MAX DISCHARGE PRESSURE 220.6 Bar (3,200psi)
WETTED HOUSINGS
(Water Chambers and Manifolds)
| Material | Ship Wt |
| Aluminum | 16 kg (36 lbs) |
NON-WETTED HOUSINGS
| Description | Material |
| Center Section | Aluminum |
| Air Valve | Polypropylene |
| Temperature Limits | |
| Operation | 12.2°C to 65.6°C (10°F – 150°F) |
MAXIMUM SUCTION LIFT CAPABILITY
7.1 m Dry (23.2′)
ơm màng Wilden H38 3200D
This double-action piston pump creates approximately a 26:1 pressure ratio of discharge fluid pressure to inlet air supply to generate up to 220.6 bar (3,200 psig). The R.038/3200D is the cost-effective solution for many applications that require discharge pressures greater than the 1:1 pressure ratio that is traditionally offered from most AODD pumps.
FLOW RATE TO 7.6 LPM (2 GPM)
MAX INLET AIR PRESSURE = 8.6 (BAR 125 PSI)
MAX DISCHARGE PRESSURE 220.6 Bar (3,200psi)
WETTED HOUSINGS
(Water Chambers and Manifolds)
| Material | Ship Wt |
| Aluminum | 16 kg (36 lbs) |
NON-WETTED HOUSINGS
| Description | Material |
| Center Section | Aluminum |
| Air Valve | Polypropylene |
| Temperature Limits | |
| Operation | 12.2°C to 65.6°C (10°F – 150°F) |
MAXIMUM SUCTION LIFT CAPABILITY
7.1 m Dry (23.2′)
ơm màng Wilden H38 3200D
This double-action piston pump creates approximately a 26:1 pressure ratio of discharge fluid pressure to inlet air supply to generate up to 220.6 bar (3,200 psig). The R.038/3200D is the cost-effective solution for many applications that require discharge pressures greater than the 1:1 pressure ratio that is traditionally offered from most AODD pumps.
FLOW RATE TO 7.6 LPM (2 GPM)
MAX INLET AIR PRESSURE = 8.6 (BAR 125 PSI)
MAX DISCHARGE PRESSURE 220.6 Bar (3,200psi)
WETTED HOUSINGS
(Water Chambers and Manifolds)
| Material | Ship Wt |
| Aluminum | 16 kg (36 lbs) |
NON-WETTED HOUSINGS
| Description | Material |
| Center Section | Aluminum |
| Air Valve | Polypropylene |
| Temperature Limits | |
| Operation | 12.2°C to 65.6°C (10°F – 150°F) |
MAXIMUM SUCTION LIFT CAPABILITY
7.1 m Dry (23.2′)
| Model sản phẩm: | T8 |
| Nhà sản xuất: | Wilden |
| Xuất xứ: | Trung Quốc |
| Lưu lượng: | 628 lít/phút |
| Cột áp: | 8,6 bar |
| Vật liệu: | nhôm, inox, gang / Neo, Buna, Teflon, Santo |
| Size: | 2″ (inch) |
| Model sản phẩm: | T4/AAMAB/TWS/TF/ATF/0014 |
| Nhà sản xuất: | Wilden |
| Xuất xứ: | Trung Quốc |
| Lưu lượng: | 484 lít/phút |
| Cột áp: | 8,6 bar |
| Vật liệu: | Nhôm / Teflon |
| Size: | 1,5″ inch |
| Motor: | Khí nén |
| Model sản phẩm: | T4/AAMAB/NES/NE/NE/0014 |
| Nhà sản xuất: | Wilden |
| Xuất xứ: | Trung Quốc |
| Lưu lượng: | 307 lít/phút |
| Cột áp: | 8,6 bar |
| Vật liệu: | Nhôm / Neo |
| Size: | 1,5″ (inch) |
Đánh giá
Chưa có đánh giá nào.