Load Cell Readout | Model GK-502
| [button link=”https://drive.google.com/file/d/1xWukRZqINiDJxFsEKm3Nvsk8PDtxraOb/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE [/button] | [button link=”https://drive.google.com/file/d/17VZgTSWx3YTcOCh2-0ktsWhYDU4COuyX/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 1[/button] |
The Model GK-502 Load Cell Readout is designed to read the GEOKON Model 3000 4-wire and 6-wire full bridge electrical resistance strain gauge type load cells. The readout incorporates a 12 Volt, 1.4 Ahr Sealed Lead Acid battery, 16 × 2 graphic LCD with backlight, membrane keypad, and battery charger circuit. Two side-mounted Bendix® connectors are provided for load cell and communications / battery charger connection. The GK-502 displays the output in Digits, mV, mV/V, or in engineering units (lbs, Kg, Kips, etc.) by entering a gauge factor and zero reading.
| Specifications | |
| Range | ±31250 digits |
| Resolution | ±1 digit |
| Accuracy | ±0.05% F.S. (±30 digits) |
| Power Requirements | 12 VDC @ 22 mA (operating); 12 VDC @ 16 µA (off) |
| Operating Temperature | −30°C to +50°C |
| L × W × H | 102 × 165 × 232 mm |
Sản phẩm tương tự
| [button link=”https://drive.google.com/file/d/1WL3OzfXRdUKG8ClEAr_Ej363UJCI1RkW/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 1[/button] | [button link=”https://drive.google.com/file/d/125jCgpmTJBARZXszPof5jW1hrQ-DtHvX/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 3[/button] |
| [button link=”https://drive.google.com/file/d/1Zfnvv2NqjHLcft65yX9LzYTlSNHTWHgG/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 2[/button] |
The Model FPC-2 Field PC* is a rugged, handheld, easy-to-use instrument for reading Digital Inclinometer Probes and Tiltmeters (in the GK-604D) and VW Sensors (in the GK-405). It’s a standalone device for reading the Model 3810A Addressable Thermistor Strings and the Model 6101D Portable Digital MEMS Tiltmeter. It can also be used to take compass bearings (with Inclinometer Probes) and to program and retrieve data from the Model 8002 (LC-2) Series Dataloggers using LogView Mobile software—a particularly useful option in harsh environments that are too extreme for a typical laptop PC.
| [button link=”https://drive.google.com/file/d/18P1gYSKZgRO0fQWStHpzvPzPq8v3ggQk/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 1[/button] | [button link=”https://drive.google.com/file/d/1i1ZaHBi3rdGtLh1krY-Ez5SqRw4hj5fX/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 2[/button] |
The Model GK-404 Vibrating Wire Readout is a portable, low-power, handheld unit that is capable of running for more than 20 hours continuously on two AA batteries. It is designed for the readout of all GEOKON vibrating wire gauges and transducers, and is capable of displaying the reading in either digits, frequency (Hz), period (µs), or microstrain (µε). The GK-404 also displays the temperature of the transducer (embedded thermistor) with a resolution of 0.1°C.
| [button link=”https://drive.google.com/file/d/1mPluvN9om6zWGXxNoWXCUoN_lnXGk9tU/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE[/button] | [button link=”https://drive.google.com/file/d/1zlY0hCMAMpUFKA0Ro8sufhvRNpCscy-m/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 2[/button] |
The Model GK-406 Vibrating Wire Analyzer is field ready and used to quickly measure a sensor, save the data, and communicate the results with custom PDF reports and spreadsheet output. The GK-406 uses spectral-analysis technology (VSPECT™), which can be helpful for reading sensors in electrically noisy environments. The large color display offers an easy-to-view graphical presentation of the sensor output and operation, and a Project File maintains Site/Sensor information for 40 unique sites with up to 22 sensors per site. Site/Sensor locations are geolocated, allowing the internal GPS to guide a user directly to a sensor location. Site/Sensor and user information can be created or edited on the device or with a computer using the included VwProjects software.
| [button link=”https://drive.google.com/file/d/1NHkAKL_21yUbcDmAEYLNkVys9_sNJt6k/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE[/button] | [button link=”https://drive.google.com/file/d/1El9qb4Ai2gdTUAEPwg3g0GL9DKgRq6qP/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE[/button] |
The Model 4999-12L/E LAB3 Surge Protection Board is designed to protect GEOKON transducers, dataloggers and power supplies from short duration, high voltage surges that may be induced in the transducer or interconnecting cables. Protection is provided by circuitry, including tripolar plasma surge arrestors, transient suppression diodes and inductors.
Đánh giá
Chưa có đánh giá nào.