Switch mạng công nghiệp redlion E2-32DI24-D

[button link=”#” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]Replace This Text[/button]

Isolated Discrete Input Channels.
Channels: 1-4.
Voltage range: 5 – 30 VDC.
Guaranteed ON voltage: 3.0 VDC.
Guaranteed OFF voltage: 1.5 VDC.
Guaranteed OFF current: 1 mA DC.
Input resistance (@ 24 VDC): 2.5K Ohms.
Input current (@ 24 VDC): 9.6 mA.
Common mode and channel-to-channel Isolation: 150 VDC.
Filtered ON/OFF delay: 25 ms (20 Hz. max. counting rate).
Fastest response: 1 ms (400 Hz. max. counting rate).
Special fast counting rate: Up to 50 KHz.
Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reporting.
Non-Isolated Discrete Input Channels.
Channels: 5-12.
Voltage range : 10 – 30 VDC.
Guaranteed ON voltage: 9.0 VDC.
Guaranteed OFF voltage: 5.0 VDC.
Guaranteed OFF current: 2 mA DC.
Input resistance: 10K Ohms.
Input current (@ 24 VDC) 3 mA.
Input Polarity: Sourcing (apply power to active) or sinking (ground closure) on 8 inputs.
Input Protection: High Impedance with overvoltage protection.
Filtered ON/OFF delay: 25 ms (20 Hz. max. counting rate).
Fastest response: 1 ms (400 Hz. max. counting rate).
Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reporting.
Non-Isolated Combination Discrete Input Channels

Channels: 13-20.
Channel Type: Discrete input and discrete output combination channel (software selectable).
Voltage range : 10 – 30 VDC.
Guaranteed ON voltage: 9.0 VDC.
Guaranteed OFF voltage: 5.0 VDC.
Guaranteed OFF current: 2 mA DC.
Input resistance: 10K Ohms.
Input current (@ 24 VDC) 3 mA.
Input Protection: High Impedance with overvoltage protection.
Filtered ON/OFF delay: 25 ms (20 Hz. max. counting rate).
Fastest response: 1 ms (400 Hz. max. counting rate).
Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reporting.
Discrete Output Channels
Output voltage range 10-30 VDC
Max. output power: 0.6A per channel, 4.8A max
Max. off state leakage: 0.01 mA (less than 10 uA)
Short circuit protection, self-reset fuses (trip above 1.5 Amp)
Min. load: 1 mA
Inrush current: 5 Amps (100 ms surge)
Typical on resistance: 0.3 Ohms (Drop 0.3 VDC @ 1 Amp)
All channels Scan rate: 1 ms
Analog Input Channels
Analog Input Range: 4-20 mA
A/D resolution 16 bits (0.003%) 10 bits (fast option)
Full scale accuracy: +/- 0.02% (at 20 °C, 16 bit mode)
Temperature coefficient +/- 50 ppm per °C (span and offset)
Input impedance (resistance): 100 ohms
Protection: Self-resetting short circuit protection fuses
DMRR (differential mode) 66 db at 50/60 Hz
Fastest update time [# of chan.]: 880 ms [all] -16-bit; 145 ms [all] -14-bit; 1 ms [2] -10-bit
Analog Output Channels
Analog output range: 4-20 mA, 0-20 mA, 0-5 VDC.
D/A resolution 16 bits (less than 1 uA).
Full scale accuracy +/-0.02% (at 20°C); All ranges after calibration.
4-20mA full scale accuracy +/-0.02% (at 20°C); Before calibration.
0-20mA full scale accuracy +/-0.1% (at 20°C); Before calibration.
Span and offset temp. +/- 50 ppm per °C typ.
Max. output settling time 5 ms (to .05%).
Max. Load resistance (@ 24 V) 750 Ohms.
Max. Load resistance (@ 10V) 300 Ohms.
Current limiting short circuit protection.
0-5VDC full scale accuracy +/-0.5% (at 20°C); Before calibration.
Min. load resistance (0-5VDC range): 20 KOhms.
​​Configuration
Configured using Crimson® 3.x software
Graphical User Interface (GUI)