VX1 – Magnetometer Kit Surface and SEPOS®-Borehole” Modular UXO Detector Kit for Use on Land, in Boreholes and Underwater
Kit with all hardware for surface, borehole and underwater use
Modular magnetometer system for UXO detection down to great depths
Polarity dependent Alarm indication by LED and audio signal
Interfaces: USB, Bluetooth® and serial
Direct communication to VALLON Hard- and Software for datalogging.
No sensor adjustment required
Detachable digital probe VSM for flexible use in all VALLON multichannel systems
The VX1 is a modular UXO detector system for ferrous object detection. It is extremely rugged and offers high search sensitivity.
It offers easy operation and meets the toughest demands in civil, humanitarian and military ordnance disposal. This versatile device quickly collects data in conjunction with data acquisition devices from VALLON. For professional data analysis and documentation, VALLON’s product portfolio offers corresponding software solutions.
In addition, the detachable digital probe VSM offers the flexibility for use in all VALLON multichannel systems.
In combination with an optional SEPOS®-detector, the high-performance SEPOS® positioning system provides increased data quality thanks to its ability to compensate speed changes during data recording in boreholes.
Suitable for following searches …
UXO : Ideally suited for searching for ferromagnetic objects of all kinds (such as unexploded ordnance, etc.), particularly for data acquisition.
Underwater : Also suited for underwater use.
Borehole : Optimized set for use in boreholes with the SEPOS® positioning system.
Probe
Sensor distance: 50 cm (19.69 “)
Sensor tube diameter: Ø 3.2 cm (Ø 1.26 “)
Measuring range: ± 20,000 nT
Device: IP68, 1.5 m (30 min at 20°C) / Digital probe VSM: IP68, 60 m
Bag cable drum – Standard
45 x 31 x 39 cm (17.72 x 12.20 x 15.35 “)
Backpack – Standard
81 x 16 x 11 cm (31.89 x 6.30 x 4.33 “)
Backpack in case – Standard
84 x 30 x 17 cm (33.07 x 11.81 x 6.69 “)
*Toleranz ± 3 %
In accordance with MIL-STD-810G
(F501.4-I, II, F502.4-I, II, F503.4-I, F506.4-III, F512.4-II, F516.5-IV)
Components kit “surface” complete
9,20 kg (20,28 lbs)
Components kit „borehole with cable drum SEPOS®” complete
7,20 kg (15,87 lbs)
*Tolerance ± 10 %
4 x Mono 1.5 V alkaline battery (LR20) – Standard
4 x Mono 1.2 V NiMH rechargeable battery (HR20)
Alkaline batteries: About 100 h
NiMH rechargeable batteries (10,000 mAh): About 100 h
*Ambient temperature 20 °C, LR20: Varta Industrial, HR20: NiMH rechargeable batteries, without Bluetooth®
Sản phẩm tương tự
Modular magnetometer system for UXO detection down to great depths
SEPOS® for precise probe position determination – thanks to optimal compensation for changes in speed during data recording
Increased data quality
Polarity dependent Alarm indication by LED and audio signal
Interfaces: USB, Bluetooth® and serial
Direct communication to VALLON Hard- and Software for datalogging
The VX1 is a modular UXO detector system for ferrous object detection. It is extremely rugged and offers high search sensitivity.
It offers easy operation and meets the toughest demands in civil, humanitarian and military ordnance disposal. This versatile device quickly collects data in conjunction with data acquisition devices from VALLON. For professional data analysis and documentation, VALLON’s product portfolio offers corresponding software solutions.
In addition, the detachable digital probe VSM offers the flexibility for use in all VALLON multichannel systems.
The high-performance SEPOS® positioning system provides increased data quality thanks to its ability to compensate for speed changes during data recording.
ble for following searches …
UXO : Ideally suited for searching for ferromagnetic objects of all kinds (such as unexploded ordnance, etc.), particularly for data acquisition.
Underwater : Also suited for underwater use.
Borehole : Optimized set for use in boreholes with the SEPOS® positioning system.
Search head with ground-penetrating radar (GPR)
Detection of cables and wires regardless of their orientation
High sensitivity to detect wires with a length of 10 cm or more
Integrated OLED display for simplified operation
Selection of various languages
Easily noticeable alarm indication (audio/visual/vibration)
The Cable Detector VR1 “Wirehound®” uses ground-penetrating radar and has been developed specifically for finding explosive devices and their components. These include the wires and cables typically used to activate IEDs.
Possible applications of this high-sensitivity ground-penetrating radar (GPR) also include locating classic GRP targets such as bodies out of plastic, wood and metal.
The VR1’s ergonomic mechanical design enables assignments lasting several hours.
Suitable for following searches …
IED* : Suitable for detecting the typical components of improvised explosive devices (e. g. wires and cables).
* Partially restricted
Large sensor distance of 170 cm
No sensor adjustment required
Carrying bar with height-adjustable probe
Polarity dependent alarm indication by LED and audio signal
Detachable VX1 control unit
The VXT1 magnetometer easily meets all necessary requirements for searching for objects at substantial depths. This outstanding detection feature can be attributed to the exceptionally large 170 cm sensor distance in particular.
In conjunction with VALLON field computers, the digital interfaces on the VXT1 make it ideal for easy data acquisition, including with optionally available GNSS.
Suitable for following searches …
UXO : Suited for searching for ferromagnetic objects of all kinds (such as unexploded ordnance, submunitions, etc.) down to very large depths – also for data acquisition.
Dual-sensor search head with a metal detector (MD) and ground-penetrating radar (GPR)
Rugged mechanical design with high-quality carbon telescoping carrying bar
The high sensitivity combined with high-efficiency soil compensation
Detection of minimum metal and metal-free objects such as improvised explosive devices (IEDs)
Easily noticeable alarm indication (audio/visual/vibration)
The VMR3 “Minehound” dual-sensor detector is internationally proven. It is ideal for the simultaneous detection of metal and metal-free objects. This is a decisive advantage e.g. for the detection of IEDs.
Two different audio signals help the user distinguish between the ground-penetrating radar (GPR) and metal detector (MD). The MD provides a simple alarm while the GPR supplies acoustic information on the depth and dimension of the object. Based on the settings, the audio signals are visually supported by the LED display.
The VMR3 is also characterized by its mechanical features: The use of carbon and glass fiber-reinforced plastic makes it extremely rugged and durable.
It meets high standards for military mine clearance and humanitarian demining.
Suitable for following searches …
Mines: Suited for mine detection. Thanks to maximum sensitivity, also react to mines with low or no metal content.
UXO*: Ideal for shallow searching for all types of metal (e. g. unexploded ordnances, submunitions, etc.).
IED*: Thanks to ground-penetrating radar, it is ideal for efficiently searching for objects with low or no metal content.
* Partially restricted
Đánh giá
Chưa có đánh giá nào.