BNA30 Magnetic Flap Level Gauge
Characteristics: It is polished, and the appearance is beautiful.
The magnetic unit material is NdFeB which is used in Space station, the magnetic structure is special,
so the magnetic beam is centered in the line plan, the strength can be sustained.
The output contact is with magnetic memory. Installation of insert mode, easy to maintain. Operation without electricity. Matching with photo-electric sign, apply to the condition of dusky light.
Profile
MN magnetic flap level meters adopt side mounting through a bypass pipe which is characterized by its easy installation, high stability and reliability or top mounting through a guide rod. The level meter is completely isolated between the inside and outsider cavity, and added a sealed flange at its bottom which can be opened easily to clean up dirt, impunity, etc.. One way level meters and meters adopting top mounting for its guide rod , equipped with a pressure hole in the top connected with atmosphere, are suitable for measuring level of medium at room temperature and pressure; Two-way level meters can be made with a certain operating pressure according to customers’ needs, and are suitable for measuring the liquid level of corrosive medium in places with high temperature, high humidity and high pressure. Level meters mainly consist of body of magnetic flat, display board of magnetic flat, floating ball, magnetic memory switch, ruler, etc.. In addition, an transmitter can be added according to customers’ needs.
Side mounted magnetic bundle unit through a bypass pipe is placed inside of the floating ball, while top mounted magnetic bundle unit is connected with a floating ball. When the floating ball moves over liquid level, the magnetic bundle unit shall move along a level relay made up of a serial of magnetic module. Under the action of the magnetic unit, the magnetic module inside the level sensor shall make a corresponding action, output a changed resistor signal, and then transfer the signal into a current output signal of 4~20mA. Meanwhile, the level can be observed directly through the quartz tube, and a magnetic switch shall conduct a related action at the corresponding point, making alarming action and control output.
| Main Technical Parameter |
| Body |
| Measurement Range: 0～3000mm(max.) (subject to actual goods) |
| Operating Pressure: Top mounting, one way, normal pressure |
| Two way: 1.0MPa, 2.5MPa, 4.0MPa or 6.3 MPa, etc.. |
| Resolution Ratio: 5mm |
| Body Material: SUS304 or 316L |
| Connection Manner: Flange (subject to actual goods for special requirement) |
| Mounting Method: One way or two way flange（thread）side mounting |
| Ambient Condition: -20~80℃，≤95%RH (avoid strong corrosive gas) |
| Transmitter: |
| Measurement Range: 0~3000mm(Max.), optional |
| Measurement Accuracy: 5mm |
| Repeatability Deviation: ±0.25%FS |
| Operating Voltage: 14~36Vdc |
| Maximum Power Loss: 5W |
| Output Signal: 4~20Ma |
| Protective Tube for Sensor: 316L |
| Wiring Box: Aluminum |
| Load Resistance: <750Ω |
| Insulation Resistance: 100MΩ(500Vdc) |
| Ambient Condition: -20~60℃，≤95%RH，avoid strong corrosive gas |
| Protection Class: IP67 |
| Magnetic Memory Switch |
| Contact Type: Standard Type: a couple of open&close passive contact output. |
| Current limiting output: with current limiting function and can be directly |
| input as PLC. |
| Active relay: extended contact output. |
| Contact Capacity: open/close contact: 1A /220Vac，1A /220Vdc |
| current limiting output:1A /220Vac，1A /220Vdc |
| active relay: 5A/24Vdc，1A/220Vac |
| Contact State: magnetic memory keeping switch |
| Insulation Resistor: ≥100MΩ (Under normal temperature) |
| Number of Action: 107 times |
| Enclosure Material: Alloy with oxidized surface |
| Ruler（Optional） |
| Overall Size: 2000(height)*13(width) mm |
| Figure Size: 5(height)*2(width）mm |
| Ruler Material: PVC adhesive plastics film |
Sản phẩm tương tự
Characteristics: Without junction box, it’s convenient to install. The zero point and full range cann’t be adjusted. The dry ceramic capacitor sensor come into contact with the medium directly, prevent the malign influence of sunshine, temperature etc, thus the output signal is just decided by the level. The measurement parts and transmission parts are integrated, the structure is compact.
Profile
LTJ11 integrated input type level transmitter use a dry ceramic capacitor sensor as measurement unit. Probe diaphragm shall be subject to level pressure, causing a corresponding elastic displacement in the process of measurement. According to the principle of level pressure in proportion to the distance between the two poles, a changing capacitance shall be detected by the transmitter, and then enlarged so that it can output a accurate voltage signal when passing through trimming circuit. Finally, the signal shall be converted to a corresponding standard current signal output with a range from 4mA to 20mA.
The measurement parts and transmission parts are integrated, compact structure, it’s easy for installation. The sensor and transmitter are sealled in the probe, and the case of the probe is a stainless steel sealing structure, the protection class can up to IP68.
Characteristics: It can work in different and extensive pressure. Good anti-jamming ability. More precise with permanent magnet. The sensor parts adopt the designation of integrated module: stable and reliable. High-resolution: as high as 5mm.
Profile: LTF21 Split-type Magnetic Inductive Level Transmitter’s measurement part and transmission part is connected by the cable, flexible for installation: suitable for narrow space or the circumstance where it can’t observe the values and wire after installation. In process of measurement, the ball built-in magnetic bundle unit shall move along a sensor made up of a serial of magnetic modules, under action of the magnetic unit, the magnetic module inside the sensor shall make counter point action, output a changed resistor signal, and then transfer the signal into a corresponding current output signal of 4~20mA.
Characteristics: Never leak with Woodd-seal. Transparent quartz tube, with ruler outside, simply operate, directly and clear. Precise and reliable. The parts have good extensibility, easy to change.
Profile
LTS quartz tube level transmitter adopts side mounting through a bypass pipe or top mounting. The transmitter contains quartz tube plus stainless protective sleeve, level switch, level transmitter, etc..
Side mounted magnetic bundle unit through a bypass pipe is placed inside of the floating ball, while top mounted magnetic bundle unit is connected with the floating ball. When the floating ball moves over liquid level, the magnetic bundle unit shall move along a level relay made up of a serial of magnetic module. Under the action of the magnetic unit, the magnetic module inside the level relay shall make a corresponding action, output a changed resistor signal, and then transfer the signal into a current output signal of 4~20mA. Meanwhile, the level can be observed directly through the quartz tube, and a magnetic switch shall conduct a related action at the corresponding point, making alarming action and control output.
The magnetic unit of the floating ball adopts a special magnetic group, which can still provide the required magnetic force for normal working of the transmitter even if used for a long period. Meanwhile, when the floating ball moves along a guide rod, the stronger linear magnetic field derived from the magnetic bundle unit of the floating ball, shall attract magnetic induction modules in the sensor one by one, thereby improving the accuracy rating and reducing the deviation of the transmitter.
Characteristics: Accurate and reliable level measurement. High accuracy up to 0.1. Flexibly installation. The zero point and full range can be adjusted. Suitable for the flowing and whipping liquid. Restrict to the length of guide rod, the measurement range is narrow: 0.5–4m.
Profile
LTJ21 guide rod insert type level transmitter adopts diffusion silicon or dry ceramic capacitor as measurement unit. In process of measurement, diaphragm of probe, under action of level pressure, shall change its capacitance or resistance. The concise voltage signal shall be output after capacitance or resistance signal is enlarged by microcircuit. Finally, the signal shall be transferred into a corresponding standard current signal output of 4~20mA.
The measurement parts and transmission parts of LTJ21 are connected by the rigidity of the stainless steel
guides, it is suitable for the environment of flow rate liquid and swinging liquid. It is easy to install. But the
guide rod’s length is limited, so the measuring range is smaller. The sensors could select ceramic capacitor diaphragm,
the measurement is accurate and reliable, its accuracy class can up to 0.1.
Đánh giá
Chưa có đánh giá nào.