LAB3 Surge Module | Model 4999-12L/E
| [button link=”https://drive.google.com/file/d/1NHkAKL_21yUbcDmAEYLNkVys9_sNJt6k/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE[/button] | [button link=”https://drive.google.com/file/d/1El9qb4Ai2gdTUAEPwg3g0GL9DKgRq6qP/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE[/button] |
The Model 4999-12L/E LAB3 Surge Protection Board is designed to protect GEOKON transducers, dataloggers and power supplies from short duration, high voltage surges that may be induced in the transducer or interconnecting cables. Protection is provided by circuitry, including tripolar plasma surge arrestors, transient suppression diodes and inductors.
| Specifications | |
| Breakdown Voltage | 7.5 V, 16 V or 30 V nominal |
| Peak Current | 5 kA (20 µs) maximum |
| Temperature Range | −20°C to +80°C |
| L × W × H | 160 × 74 × 76 mm |
Sản phẩm tương tự
| [button link=”https://drive.google.com/file/d/1F10C2kUJ8hBmhdu2_u0pc27jTYj6t955/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE [/button] | [button link=”https://drive.google.com/file/d/18D302KJVwzVADfLviguSkjCPW-LWQcZm/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE[/button] |
The Model RB-500 MEMS (Micro Electro Mechanical Sensor) Readout is designed to read the voltage output from the Model 6160 MEMS Tilt Sensors, 6161 MEMS Tilt Sensors, 6165 MEMS Tilt Beams and 6100 Series MEMS sensors. The RB-500 incorporates a 12 volt, 1.2 Ahr lead acid battery, a 4½ digit liquid crystal display (LCD), a power on/off switch, an A/B selector switch, a battery charger circuit, an AC adaptor connector, and an Input Junction Box Assembly. The RB-500 supplies +12 V power to the MEMS sensor and displays the output in volts, which is proportional to the angle of inclination.
| [button link=”https://drive.google.com/file/d/1TMR8sGEtLVi9ou9rcpTsyRvWJbe5uusQ/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE -1[/button] | [button link=”https://drive.google.com/file/d/1_YBWgFofVpfUDeZPQnVyb5joxaoG3pUX/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 2[/button] |
| [button link=”https://drive.google.com/file/d/1XOH2ydI2xxmnHm6j1WFklmi0ivgdrJle/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 3[/button] | [button link=”https://drive.google.com/file/d/1oFijGXhqvXTxFd4wvZ5GWrI0LXMVzvDw/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 4[/button] |
The Model GK-405 Vibrating Wire Readout is designed for use with all GEOKON vibrating wire sensors. It comprises a battery-powered readout unit, which communicates via Bluetooth® wireless technology to the Model FPC-2 Field PC running the GK-405 application. The Model GK-405 can also read the thermistors included with most GEOKON vibrating wire sensors, and display the temperature directly in °C. When reading load cells, a built-in multiplexer automatically scans through all the vibrating wire sensors, averages the readings, applies the calibration factor and offset, and displays the load directly in engineering units. All the readings can be stored and exported to a number of different file formats. Syncing to a host computer is simple and straightforward, allowing project folders and data files to be easily saved. The GK-405 readout is available with or without the handheld Field PC because the Model GK-604-6 Field PC, provided with the Model GK-604 Inclinometer Readout, is compatible with both systems.
| [button link=”https://drive.google.com/file/d/1WL3OzfXRdUKG8ClEAr_Ej363UJCI1RkW/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 1[/button] | [button link=”https://drive.google.com/file/d/125jCgpmTJBARZXszPof5jW1hrQ-DtHvX/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 3[/button] |
| [button link=”https://drive.google.com/file/d/1Zfnvv2NqjHLcft65yX9LzYTlSNHTWHgG/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 2[/button] |
The Model FPC-2 Field PC* is a rugged, handheld, easy-to-use instrument for reading Digital Inclinometer Probes and Tiltmeters (in the GK-604D) and VW Sensors (in the GK-405). It’s a standalone device for reading the Model 3810A Addressable Thermistor Strings and the Model 6101D Portable Digital MEMS Tiltmeter. It can also be used to take compass bearings (with Inclinometer Probes) and to program and retrieve data from the Model 8002 (LC-2) Series Dataloggers using LogView Mobile software—a particularly useful option in harsh environments that are too extreme for a typical laptop PC.
| [button link=”https://drive.google.com/file/d/1mPluvN9om6zWGXxNoWXCUoN_lnXGk9tU/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE[/button] | [button link=”https://drive.google.com/file/d/1zlY0hCMAMpUFKA0Ro8sufhvRNpCscy-m/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGUE 2[/button] |
The Model GK-406 Vibrating Wire Analyzer is field ready and used to quickly measure a sensor, save the data, and communicate the results with custom PDF reports and spreadsheet output. The GK-406 uses spectral-analysis technology (VSPECT™), which can be helpful for reading sensors in electrically noisy environments. The large color display offers an easy-to-view graphical presentation of the sensor output and operation, and a Project File maintains Site/Sensor information for 40 unique sites with up to 22 sensors per site. Site/Sensor locations are geolocated, allowing the internal GPS to guide a user directly to a sensor location. Site/Sensor and user information can be created or edited on the device or with a computer using the included VwProjects software.
Đánh giá
Chưa có đánh giá nào.