METAL DETECTION FOR FORESTRY AND SAWMILLS METAL SHARK® OCTA
[button link=”https://drive.google.com/file/d/15w4V_2y1W2CO0PSFPNBXqUt865Q2KS0E/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Optimally adapted to the monitoring of entire tree trunks
Sensor diameter up to 1.8 m (further sizes on request)
Sturdy stainless steel design: particularly robust and with short metal-free zone
Maintenance-free with automatic balance and calibration control
Sturdy stainless steel design: particularly robust and with short metal-free zone
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Features
Sensor diameter up to 1.8 m (further sizes on request)
Robust against environmental influences such as high and low temperatures
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Easy to use with intuitive and multilingual menus
Memory for up to 250 products
Maintenance-free with Autocalibration
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
4-level password system, automatic log out after time lapse
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® OCTA has been developed for industrial applications in the timber industry and sawmills. It detects magnetic and non-magnetic metal contaminants (iron, tombac, brass, stainless steel, etc.) precisely and reliably even under difficult conditions.
The octagonal shape makes it ideal for monitoring logs for metal parts such as shrapnel, bullet fragments, nails, screws, etc.
It is typically installed in troughed conveyor belts.
Accessories & Extras
The METAL SHARK® OCTA can be perfectly adapted to your production by various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
Specifications
| Electronics | Digital signal processor, digital frequency generation, digital balance control, automatic calibration, digital noise filters, integrated flexible control functions |
| Input | 2 analog 0…10 VDC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons |
| Output | 2 floating: “error” and “metal” 8 freely configurable 24 V DC signals |
| Inspection method | High-frequency magnetic field, multi-channel operation, balanced receiver coils |
| Metal detection | Ferrous, non-ferrous (e.g. tombac, brass, bronze, aluminium, lead etc.) and stainless steel |
| Product compensation | Memory for up to 250 products, automatic product compensation, with TeachAssistent |
| Encclosure rating | IP 65 |
| Environmental conditions | standard: -20°C to +40°C / -4°F to 104°F, rel. humidity 30% up to 80% (non-condensing) optionally: -40°C / -40°F or +55°C / 131°F |
| Temperature of goods inspected | up to 70°C / 158°F |
| Power supply | One phase 110-240 VAC, 50/60 Hz, typ. consumption 20 W (max. 60 W) |
| Interface | RS232, LAN (optional, für SHARKNET®), USB (optional) |
| Maintenance | Maintenance-free, selfcalibrating sensors |
| Diagnostics | Integrated diagnostic software, automatic self-test |
| SHARKNET® | The SHARKNET® software connects METAL SHARK® metal detectors with a central computer, providing centralized storage of all operating data plus batch and alarm documentation for HACCP and IFS compliance. |
| Fast Power Drive (FPD) | Significantly improves metal detection and reliability in industrial environments that do not meet the standards for electromagnetic compatibility. Various IP protection classes possible, ATEX Zone 22 possible. |
| Super Power Drive (SPD) | Improves metal detection by -0.5 to -1 mm in industrial environments that do not meet electromagnetic compatibility standards, with different IP protection classes and ATEX Zone 22 possible. |
| Temperature extension (cold) | Temperature range extended to -40°C / -40°F, resin seals remain elastic at low temperatures. Special insulation, heated enclosure and other features. |
| Temperature extension (hot) | Temperature range extended to +55°C / +131°F, adapted enclosure, additional thermal insulation, replaceable filter fan, heat exchanger and/or active cooling units. |
| Signalling devices (optical/acoustic) | Stacking lights and signal horns/sirens available in different versions and IP protection classes. |
Sản phẩm tương tự
[button link=”https://drive.google.com/file/d/1pS1Pxrb6doSbkfP_j2Ie7mXJ7N1TkrxH/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects magnetic and non-magnetic metals in fabrics and webs
Particularly flat for optimal approach to ascending or descending product paths, FL compact additionally rotatable
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Maintenance-free with automatic balance and calibration control
Features
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
IFS and HACCP reports easily available on the display at the touch of a button
Cyclical function monitoring with Performance Validation System (PVS)
Optionally: Data transfer to USB interface or connection to the company net-work via SHARKNET® softwareFunction
The METAL SHARK® FL and FL compact metal detectors are usually used for the inspection of nonwovens, textiles and films.
Both detectors are particularly flat and available in widths of 1,000 – 4,000 mm. The FL compact is rotatably mounted so that it can also be adapted to sloping webs.
Due to the high sensitivity of the FL models, tiny magnetic and non-magnetic metal particles (e.g. iron, aluminium and stainless steel) are detected over the entire width.
[button link=”https://drive.google.com/file/d/18_DGS4a1ycGbmUVWt3pCA7VU7cg_NZ39/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Precise metal detection due to multi-segment sensor for particularly flat products
Highest sensitivity through 4-quadrant technology
Rotating sensor traverse adapts perfectly even to vertical or inclined product flow
Freely selectable widths up to 7 m and more
Intuitive control and easy installation with auto-calibration and TeachAssistant
Maintenance-free due to automatic balance and calibration control
Features
Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Detects iron from 0.5 mm and stainless steel from 0.9 mm with its position in a defined area of the fabric
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® COMBI is a rotatable multi-segment sensor that is typically used over very flat products such as fiber wood, plastic boards, fabric or nonwoven, paper or plastic webs.
It detects the smallest metal particles from 0.5 mm and locates their position in defined segments of the fabric.
The METAL SHARK® COMBI is available for widths up to 7,000 mm and more. It can also be operated without problems in humid workplaces with ambient temperatures from -10˚C to +40˚C and product temperatures up to 90°C.
Accessories & Extras
The METAL SHARK® COMBI can be perfectly adapted to your production by various special designs and accessories. Different numbers of sensor plates and widths um to 7,000 mm are possible as well as swiveling traverse arms or an adjustable travrse height.
For your audit reliability, a Performance Verification Certificate can be issued by CASSEL service technicians during commissioning or maintenance.
[button link=”https://drive.google.com/file/d/1CfN0n6N2gAYLPOIjpp5Q_ZFbII4yZMu7/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metals in packaged and unpackaged products on conveyor belts
Removable sides make it particularly easy to install, ideal for conveyors that cannot be split
Highest sensitivity with 4-quadrant technology
Autocalibration and TeachAssistant for intuitive control and easy setup
Maintenance-free due to automatic balance and calibration control
Function
Metal detector METAL SHARK® TU is used in combination with conveyor belts or chutes when they cannot be divided or dismantled. The sidewalls of the TU can be removed so that the sensor plates can be easily pushed over and under the belt.
Thanks to its 4-quadrant technology, it detects magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminum etc.) precisely and reliably. The robust stainless steel housing is easy to clean and robust and therefore suitable for many industries.
[button link=”https://drive.google.com/file/d/1av4SiQqk3SbIiPmpV_eQM_-SdkUCAEfJ/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Monitors bulk materials in the mining and building materials industry
Self-adjusting and extremely easy to install
High-quality components ensure reliability and long service life
Detects ferrous and non-ferrous metals, iron oxide and ore are ignored
Probe and amplifier are immune to vibration and resistant to weather, dirt and stone chips
Sturdy aluminium design: particularly robust and easy to clean
Features
High sensitivity (M6 nuts) at belt speed of 0.1 – 4 m/s
Very simple operation
Can be used near frequency converters, only 1 m minimum distance between probe and motors or magnets
Monitoring and display of internal para-meters
Optional: Realization as tandem for higher debris heights
Optional: complete blanking of magneti-te Fe304
Function
The SQ and SQTA metal detectors offer good metal sensitivity for monitoring bulk materials in the mining and construction industry.
They are extremely durable, insensitive to vibrations and resistant to weather, dirt or stone chips. They are easy to install, handle and maintain.
Both are available for belt widths from 500 mm to 1,200 mm. At a belt speed of 0.1 – 4.0 m/s they can easily detect metal parts of the size of about M6 nuts and larger.
For a higher belt speed (M10 nuts) at a belt speed of max. 4.0 m/s we recommend the metal detectors SQ and SQTA.
Đánh giá
Chưa có đánh giá nào.