METAL DETECTOR FOR STONE AND EARTH PROCESSING Metal detector QLC/QLCTA
[button link=”https://drive.google.com/file/d/1VsV1-_LD80DdyLconHkAk96eVwsQMIPo/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Monitors bulk materials in the building materials industry or mining
Self-adjusting and extremely easy to install
High-quality components ensure reliability and long service life
Detects ferrous and non-ferrous metals, iron oxide and ore are ignored
Probe and amplifier are immune to vibration and resistant to weather, dirt and stone chips
Particularly robust and easy to clean
Features
Good sensitivity (M10 nuts) at belt speed of 0.3 – 6 m/s
Very simple operation
Can be used close to frequency conver-ters, only 2 m minimum distance between probe and motors or magnets
Belt widths from 500 mm to 2,000 mm
Monitoring and display of internal para-meters
Optional: Realization as tandem for higher debris heights
Optional: complete suppression of magnetite Fe3O4
Function
The QLC and QLCTA metal detectors offer good metal sensitivity for monitoring bulk materials in the mining and construction materials industry.
At a belt speed of 0.3 – 6.0 m/s they easily detect metal parts of the size of about M10 nuts and larger.
For higher sensitivity (M6 nuts) at a belt speed of max. 4.0 m/s we recommend the metal detectors SQ and SQTA.
Specifications
| QLC and QLCTA | |
| Input Signals | Sensor and coaxial cable |
| Output Signals | Metal alarm relay with 2 potential-free changeover contacts, switching capacity 230V/6A |
| Metal Detection | Iron, non-ferrous (e.g. aluminium or copper), largely ignores ores Optional: complete blanking of magnetite Fe304 |
| Belt widths | 500 – 2,000 mm |
| Belt speed | 0.3 – 6.0 m/s |
| Protection Type | IP55 |
| Ambience | -20° C up to +55° C |
| Power Supply | 230V 15 Hz +/- 15%, typ. consumption 15 VA |
| Controller | Sheet steel housing, prepared for wall mounting, 9 kg |
| Types | Mono (QLC) for lower debris heights, tandem (QLCTA) for higher debris heights |
| Sensitivity | from steel nuts M10 |
Sản phẩm tương tự
[button link=”https://drive.google.com/file/d/1CfN0n6N2gAYLPOIjpp5Q_ZFbII4yZMu7/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metals in packaged and unpackaged products on conveyor belts
Removable sides make it particularly easy to install, ideal for conveyors that cannot be split
Highest sensitivity with 4-quadrant technology
Autocalibration and TeachAssistant for intuitive control and easy setup
Maintenance-free due to automatic balance and calibration control
Function
Metal detector METAL SHARK® TU is used in combination with conveyor belts or chutes when they cannot be divided or dismantled. The sidewalls of the TU can be removed so that the sensor plates can be easily pushed over and under the belt.
Thanks to its 4-quadrant technology, it detects magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminum etc.) precisely and reliably. The robust stainless steel housing is easy to clean and robust and therefore suitable for many industries.
[button link=”https://drive.google.com/file/d/1wjvs2KFI53sP61JXj7DxrA6o_QDFk4pW/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
System solution consisting of metal detector METAL SHARK® BD and Conveyor HW
Disassembled in a few easy steps – ideal for daily hose cleaning
Removable PU belt is FDA compliant
Stable frame construction made of 100% stainless steel
Very cost-efficient and easy to integrate into existing conveyor lines
Function
The HW series conveyor belts are combined as standard with METAL SHARK® BD metal detectors and are mainly adapted to the requirements of the food industry.
The white PU belt is FDA compliant and can be removed in just a few steps. The belt and the stable stainless steel frame can be cleaned easily and quickly.
[button link=”https://drive.google.com/file/d/18_DGS4a1ycGbmUVWt3pCA7VU7cg_NZ39/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Precise metal detection due to multi-segment sensor for particularly flat products
Highest sensitivity through 4-quadrant technology
Rotating sensor traverse adapts perfectly even to vertical or inclined product flow
Freely selectable widths up to 7 m and more
Intuitive control and easy installation with auto-calibration and TeachAssistant
Maintenance-free due to automatic balance and calibration control
Features
Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Detects iron from 0.5 mm and stainless steel from 0.9 mm with its position in a defined area of the fabric
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® COMBI is a rotatable multi-segment sensor that is typically used over very flat products such as fiber wood, plastic boards, fabric or nonwoven, paper or plastic webs.
It detects the smallest metal particles from 0.5 mm and locates their position in defined segments of the fabric.
The METAL SHARK® COMBI is available for widths up to 7,000 mm and more. It can also be operated without problems in humid workplaces with ambient temperatures from -10˚C to +40˚C and product temperatures up to 90°C.
Accessories & Extras
The METAL SHARK® COMBI can be perfectly adapted to your production by various special designs and accessories. Different numbers of sensor plates and widths um to 7,000 mm are possible as well as swiveling traverse arms or an adjustable travrse height.
For your audit reliability, a Performance Verification Certificate can be issued by CASSEL service technicians during commissioning or maintenance.
[button link=”https://drive.google.com/file/d/1KXBB8MSTfUeJ03Adm2a0ps0MV1qjOfdb/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metal contaminants in sausage meat and pâtés
Easy to integrate into all common piping systems
Stainless steel housing and frame are easy to clean, product pipe is CIP-compatible (Cleaning In Place)
Highest sensitivity through 4-quadrant technology
Intuitive operation, auto-calibration and TeachAssistant
FDA compliant
IN Meat is used with clippers, for twist off devices please use METAL SHARK® INA Meat
Function
Compact metal detector for sausage filling machines with mobile base frame on wheels. The stand with integrated gas spring offers easy height adjustment from 85-115 cm height.
The METAL SHARK® IN Meat is placed between filler and clip machine and can be delivered with or without ejection unit.
The unit is easy to clean and complies with FDA standards.
Đánh giá
Chưa có đánh giá nào.