METAL DETECTOR FOR STONE AND EARTH PROCESSING Metal detector QLC/QLCTA
[button link=”https://drive.google.com/file/d/1VsV1-_LD80DdyLconHkAk96eVwsQMIPo/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Monitors bulk materials in the building materials industry or mining
Self-adjusting and extremely easy to install
High-quality components ensure reliability and long service life
Detects ferrous and non-ferrous metals, iron oxide and ore are ignored
Probe and amplifier are immune to vibration and resistant to weather, dirt and stone chips
Particularly robust and easy to clean
Features
Good sensitivity (M10 nuts) at belt speed of 0.3 – 6 m/s
Very simple operation
Can be used close to frequency conver-ters, only 2 m minimum distance between probe and motors or magnets
Belt widths from 500 mm to 2,000 mm
Monitoring and display of internal para-meters
Optional: Realization as tandem for higher debris heights
Optional: complete suppression of magnetite Fe3O4
Function
The QLC and QLCTA metal detectors offer good metal sensitivity for monitoring bulk materials in the mining and construction materials industry.
At a belt speed of 0.3 – 6.0 m/s they easily detect metal parts of the size of about M10 nuts and larger.
For higher sensitivity (M6 nuts) at a belt speed of max. 4.0 m/s we recommend the metal detectors SQ and SQTA.
Specifications
| QLC and QLCTA | |
| Input Signals | Sensor and coaxial cable |
| Output Signals | Metal alarm relay with 2 potential-free changeover contacts, switching capacity 230V/6A |
| Metal Detection | Iron, non-ferrous (e.g. aluminium or copper), largely ignores ores Optional: complete blanking of magnetite Fe304 |
| Belt widths | 500 – 2,000 mm |
| Belt speed | 0.3 – 6.0 m/s |
| Protection Type | IP55 |
| Ambience | -20° C up to +55° C |
| Power Supply | 230V 15 Hz +/- 15%, typ. consumption 15 VA |
| Controller | Sheet steel housing, prepared for wall mounting, 9 kg |
| Types | Mono (QLC) for lower debris heights, tandem (QLCTA) for higher debris heights |
| Sensitivity | from steel nuts M10 |
Sản phẩm tương tự
[button link=”https://drive.google.com/file/d/18_DGS4a1ycGbmUVWt3pCA7VU7cg_NZ39/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Precise metal detection due to multi-segment sensor for particularly flat products
Highest sensitivity through 4-quadrant technology
Rotating sensor traverse adapts perfectly even to vertical or inclined product flow
Freely selectable widths up to 7 m and more
Intuitive control and easy installation with auto-calibration and TeachAssistant
Maintenance-free due to automatic balance and calibration control
Features
Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Detects iron from 0.5 mm and stainless steel from 0.9 mm with its position in a defined area of the fabric
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® COMBI is a rotatable multi-segment sensor that is typically used over very flat products such as fiber wood, plastic boards, fabric or nonwoven, paper or plastic webs.
It detects the smallest metal particles from 0.5 mm and locates their position in defined segments of the fabric.
The METAL SHARK® COMBI is available for widths up to 7,000 mm and more. It can also be operated without problems in humid workplaces with ambient temperatures from -10˚C to +40˚C and product temperatures up to 90°C.
Accessories & Extras
The METAL SHARK® COMBI can be perfectly adapted to your production by various special designs and accessories. Different numbers of sensor plates and widths um to 7,000 mm are possible as well as swiveling traverse arms or an adjustable travrse height.
For your audit reliability, a Performance Verification Certificate can be issued by CASSEL service technicians during commissioning or maintenance.
[button link=”https://drive.google.com/file/d/1b7OBWPwwl17y7OM3o7M1bFgPnmPcKDH9/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Specially designed for the monitoring of wood, fibre boards or any wide but thin product
AutoSens technology for automatic adjustment of the sensitivity to the mat height
Maintenance-free with automatic balance and calibration control
Durable aluminium design: particularly robust and easy to clean
Highest sensitivity with 4-quadrant technology
Autocalibration and Teach Assistant for intuitive control and easy installation
Features
Aperture widths from 1 m to 5 m as a standard (further sizes on request)
Maximum search performance with hig-hest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Easy to use with intuitive and multilingu-al menus
Memory for up to 250 products
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® BIG pba with rectangular opening at a rather low opening height is especially designed for monitoring fibre mats, MDF, OSC or chipboard as well as other panel materials.
The typical installation takes place around a conveyor belt with flat belt.
Using 3D detection technology, it detects magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminium etc.) precisely and reliably even under difficult conditions.
Accessories & Extras
The METAL SHARK® BIG pba can be perfectly adapted to your production with various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”https://drive.google.com/file/d/1pEBopERQ0AygrArHspvQc7pUgSXS-vfk/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Detects metal contaminants in plates and webs
Precise metal detection with multi-segment sensor saves valuable material
Highest sensitivity through 4-quadrant technology
Intuitive control and easy setup with autocalibration and Teach Assistant
Maintenance-free through automatic balance and calibration control
Features
Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory spaces for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Detects the position of the metal contamination in the fabric
Sensitivity: Detects iron from 0.6 mm and stainless steel from 0.7 mm
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® COMBI TU is a multi-segment sensor typically used over fabric, non-woven or paper webs as well as plates of different materials. It detects the smallest metal particles from 0.6 mm and localizes their position in defined segments of the product.
The METAL SHARK® COMBI TU is suitable for widths up to
5 m/16.6 ft and more available. It can be easily operated in humid environments with ambient temperatures from -10˚C to +40˚C and product temperatures up to 65°C.
Accessories & Extras
The METAL SHARK® COMBI TU can be perfectly adapted to your production by various special designs and accessories. Various temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”https://drive.google.com/file/d/1gaUf4cFS6nUZ-sBRvoTbIiyOUGSPR3Tg/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metal contaminants in tablets and capsules
IQ, OQ, PQ qualification certificates are delivered directly, SQ also possible on request
Ejection with pendulum bell ensures that products are not damaged or jammed
Mobile and height adjustable, dismountable without tools for cleaning
Intuitive control, autocalibration and Teach Assistant
Features
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with Teach Assistant
Memory spaces for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
IFS and HACCP reports available on the display at the touch of a button
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® PH is typically used at the outlet of tablet presses. It offers the highest metal sensitivity in detecting magnetic and non-magnetic metals.
The tablets fall through the metal detector. The ejection flap arranged downstream separates tablets with the smallest metal contaminants from the product stream.
The high-quality construction is maintenance-free. For cleaning, all parts in contact with the product can be disassembled without tools.
Đánh giá
Chưa có đánh giá nào.