VMR3 “Minehound” – Dual-Sensor Detector with LED Display
Dual-sensor search head with a metal detector (MD) and ground-penetrating radar (GPR)
Rugged mechanical design with high-quality carbon telescoping carrying bar
The high sensitivity combined with high-efficiency soil compensation
Detection of minimum metal and metal-free objects such as improvised explosive devices (IEDs)
Easily noticeable alarm indication (audio/visual/vibration)
The VMR3 “Minehound” dual-sensor detector is internationally proven. It is ideal for the simultaneous detection of metal and metal-free objects. This is a decisive advantage e.g. for the detection of IEDs.
Two different audio signals help the user distinguish between the ground-penetrating radar (GPR) and metal detector (MD). The MD provides a simple alarm while the GPR supplies acoustic information on the depth and dimension of the object. Based on the settings, the audio signals are visually supported by the LED display.
The VMR3 is also characterized by its mechanical features: The use of carbon and glass fiber-reinforced plastic makes it extremely rugged and durable.
It meets high standards for military mine clearance and humanitarian demining.
Suitable for following searches …
Mines: Suited for mine detection. Thanks to maximum sensitivity, also react to mines with low or no metal content.
UXO*: Ideal for shallow searching for all types of metal (e. g. unexploded ordnances, submunitions, etc.).
IED*: Thanks to ground-penetrating radar, it is ideal for efficiently searching for objects with low or no metal content.
* Partially restricted
Dual-sensor search head
Metal detector (MD) and ground-penetrating radar (GPR)
31.5 x 18 cm (12.40 x 7.09 “)
IP68, 1.5 m (1 h at 20 °C)
Case
102 x 43 x 17 cm (40.15 x 16.93 x 6.70 “)
*Tolerance ± 3 %
In accordance with MIL-STD-810F
(F501.4-I, II, F502.4-I, II, F503.4-I, F506.4-III, F512.4-II, F516.5-IV)
Detector with/without standard battery
4.0 kg (8.82 lbs) / 3.54 kg (7.80 lbs)
Basic package – Detector in the case including the standard scope of delivery
14.60 kg (32.19 lbs)
*Tolerance ± 10 %
1 x VAP3 7.4 V/5.4 Ah lithium polymer rechargeable battery – Standard
4 x Mono LR20 1.5 V alkaline battery
VAP3 lithium polymer rechargeable battery: About 8.5 h*
Alkaline batteries: About 6.5 h
*Ambient temperature of about 20 °C, LR20: Varta Industrial, VAP3.
Sản phẩm tương tự
Kit with all hardware for surface, borehole and underwater use
Modular magnetometer system for UXO detection down to great depths
Polarity dependent Alarm indication by LED and audio signal
Interfaces: USB, Bluetooth® and serial
Direct communication to VALLON Hard- and Software for datalogging.
No sensor adjustment required
Detachable digital probe VSM for flexible use in all VALLON multichannel systems
The VX1 is a modular UXO detector system for ferrous object detection. It is extremely rugged and offers high search sensitivity.
It offers easy operation and meets the toughest demands in civil, humanitarian and military ordnance disposal. This versatile device quickly collects data in conjunction with data acquisition devices from VALLON. For professional data analysis and documentation, VALLON’s product portfolio offers corresponding software solutions.
In addition, the detachable digital probe VSM offers the flexibility for use in all VALLON multichannel systems.
In combination with an optional SEPOS®-detector, the high-performance SEPOS® positioning system provides increased data quality thanks to its ability to compensate speed changes during data recording in boreholes.
Suitable for following searches …
UXO : Ideally suited for searching for ferromagnetic objects of all kinds (such as unexploded ordnance, etc.), particularly for data acquisition.
Underwater : Also suited for underwater use.
Borehole : Optimized set for use in boreholes with the SEPOS® positioning system.
– Thiết bị dò tìm bom, mìn, vật nổ; dò tìm trên cạn, dưới nước.
– Chức năng tự động cân bằng địa với hiệu quả cao.
– Chiều dài có thể điều chỉnh.
– Áp suất nước ≥ 30m.
– Nguồn điện: 3 pin kiềm 1,5V cỡ C. Thời gian hoạt động của pin ≥ 9 giờ.
– Tốc độ dò: 0,3 – 1,5m/s (trên cạn); 0,1 – 1m/s (dưới nước).
– Nhiệt độ hoạt động: -32⁰C đến +63⁰C.
– Chương trình dò tìm: 2 chương trình đất.
– Báo tín hiệu: Âm thanh, hiển thị.
– Giảm nhiễu đường dây điện: Tự động.
– Theo tiêu chuẩn môi trường: MIL STD 810F; 501.4-II, 502.4-I, 502.4-II, 503.4; 506.4-III, 514.5 C1.
– Đồng bộ gồm: Hộp điều khiển, chảo dò, thanh mang, tai nghe ngoài, pin, hộp cứng đựng máy, sách hướng dẫn sử dụng.
Modular magnetometer system for UXO detection down to great depths
SEPOS® for precise probe position determination – thanks to optimal compensation for changes in speed during data recording
Increased data quality
Polarity dependent Alarm indication by LED and audio signal
Interfaces: USB, Bluetooth® and serial
Direct communication to VALLON Hard- and Software for datalogging
The VX1 is a modular UXO detector system for ferrous object detection. It is extremely rugged and offers high search sensitivity.
It offers easy operation and meets the toughest demands in civil, humanitarian and military ordnance disposal. This versatile device quickly collects data in conjunction with data acquisition devices from VALLON. For professional data analysis and documentation, VALLON’s product portfolio offers corresponding software solutions.
In addition, the detachable digital probe VSM offers the flexibility for use in all VALLON multichannel systems.
The high-performance SEPOS® positioning system provides increased data quality thanks to its ability to compensate for speed changes during data recording.
ble for following searches …
UXO : Ideally suited for searching for ferromagnetic objects of all kinds (such as unexploded ordnance, etc.), particularly for data acquisition.
Underwater : Also suited for underwater use.
Borehole : Optimized set for use in boreholes with the SEPOS® positioning system.
Modular magnetometer system for UXO detection down to great depths
Polarity dependent Alarm indication by LED and audio signal
Interfaces: USB, Bluetooth® and serial
No sensor adjustment required
Direct communication to VALLON Hard- and Software for datalogging
Detachable digital probe VSM for flexible use in all VALLON multichannel systems
The VX1 is a modular UXO detector system for ferrous object detection. It is extremely rugged and offers high search sensitivity.
It offers easy operation and meets the toughest demands in civil, humanitarian and military ordnance disposal. This versatile device quickly collects data in conjunction with data acquisition devices from VALLON. For professional data analysis and documentation, VALLON’s product portfolio offers corresponding software solutions.
In addition, the detachable digital probe VSM offers the flexibility for use in all VALLON multichannel systems.
Suitable for following searches …
UXO : Ideally suited for searching for ferromagnetic objects of all kinds (such as unexploded ordnance, etc.), also for data acquisition.
Underwater : Also suited for underwater use.
Borehole : Optimized set for use in boreholes – alternatively available as set with SEPOS® positioning system.
Đánh giá
Chưa có đánh giá nào.