VX1 – Magnetometer Kit “SEPOS®-Borehole” Modular UXO Detector Kit with SEPOS®-Borehole for precise Probe Position Determination
Modular magnetometer system for UXO detection down to great depths
SEPOS® for precise probe position determination – thanks to optimal compensation for changes in speed during data recording
Increased data quality
Polarity dependent Alarm indication by LED and audio signal
Interfaces: USB, Bluetooth® and serial
Direct communication to VALLON Hard- and Software for datalogging
The VX1 is a modular UXO detector system for ferrous object detection. It is extremely rugged and offers high search sensitivity.
It offers easy operation and meets the toughest demands in civil, humanitarian and military ordnance disposal. This versatile device quickly collects data in conjunction with data acquisition devices from VALLON. For professional data analysis and documentation, VALLON’s product portfolio offers corresponding software solutions.
In addition, the detachable digital probe VSM offers the flexibility for use in all VALLON multichannel systems.
The high-performance SEPOS® positioning system provides increased data quality thanks to its ability to compensate for speed changes during data recording.
ble for following searches …
UXO : Ideally suited for searching for ferromagnetic objects of all kinds (such as unexploded ordnance, etc.), particularly for data acquisition.
Underwater : Also suited for underwater use.
Borehole : Optimized set for use in boreholes with the SEPOS® positioning system.
Probe
Sensor distance: 50 cm (19.69 “)
Sensor tube diameter: Ø 3.2 cm (Ø 1.26 “)
Measuring range: ± 20,000 nT
Device: IP68, 1.5 m (30 min at 20°C) / Digital probe VSM: IP68, 60 m
Transport container probe VSM – Standard
75 x Ø 8.5 cm (29.53 x Ø 3.35 “)
Bag cable drum – Standard
45 x 31 x 39 cm (17.72 x 12.20 x 15.35 “)
*Toleranz ± 3 %
In accordance with MIL-STD-810G
(F501.4-I, II, F502.4-I, II, F503.4-I, F506.4-III, F512.4-II, F516.5-IV)
Basic package – Detector including standard scope of delivery
9.50 kg (20.94 lbs)
Cable drum with accessories
7.14 kg (15.74 lbs)
Probe
0.67 kg (1.48 lbs)
Control unit
0.41 kg (0.90 lbs)
*Tolerance ± 10 %
4 x Mono 1.5 V alkaline battery (LR20) – Standard
4 x Mono 1.2 V NiMH rechargeable battery (HR20)
Alkaline batteries: About 100 h
NiMH rechargeable batteries (10,000 mAh): About 100 h
*Ambient temperature of about 20 °C, LR20: Varta Industrial, HR20: NiMH rechargeable batteries, without Bluetooth®
Sản phẩm tương tự
Kit with all hardware for surface, borehole and underwater use
Modular magnetometer system for UXO detection down to great depths
Polarity dependent Alarm indication by LED and audio signal
Interfaces: USB, Bluetooth® and serial
Direct communication to VALLON Hard- and Software for datalogging.
No sensor adjustment required
Detachable digital probe VSM for flexible use in all VALLON multichannel systems
The VX1 is a modular UXO detector system for ferrous object detection. It is extremely rugged and offers high search sensitivity.
It offers easy operation and meets the toughest demands in civil, humanitarian and military ordnance disposal. This versatile device quickly collects data in conjunction with data acquisition devices from VALLON. For professional data analysis and documentation, VALLON’s product portfolio offers corresponding software solutions.
In addition, the detachable digital probe VSM offers the flexibility for use in all VALLON multichannel systems.
In combination with an optional SEPOS®-detector, the high-performance SEPOS® positioning system provides increased data quality thanks to its ability to compensate speed changes during data recording in boreholes.
Suitable for following searches …
UXO : Ideally suited for searching for ferromagnetic objects of all kinds (such as unexploded ordnance, etc.), particularly for data acquisition.
Underwater : Also suited for underwater use.
Borehole : Optimized set for use in boreholes with the SEPOS® positioning system.
– Thiết bị dò tìm bom, mìn, vật nổ thông dụng; dò tìm trên cạn, dưới nước, trong lỗ khoan.
– Hộp điều khiển có thể tháo rời dễ dàng vận hành khi dò tìm trong lỗ khoan.
– Ống sen sơ không cần hiệu chỉnh.
– Ống sen sơ có thể điều chỉnh thay đổi độ dài.
– Ống đầu dò có thể tháo rời, thích hợp khi sử dụng trên dàn dò đa sen sơ.
– Đầu ra dữ liệu qua kết nối USB, Bluetooth
– Thang đo: 9 (2-20.0000nT)
– Nguồn điện: 4 cục pin 1.5V kiểu D hoặc 4 cục pin xạc 1.2V kiểu D hoặc nguồn điện ngoài 6V.
Thời gian hoạt động của pin: ≥ 100 giờ với pin kiềm (không sử dụng Bluetooth); ≥ 80 giờ với pin kiềm (có sử dụng Bluetooth).
– Khoảng cách sen sơ ≥ 500 mm.
– Đường kính ống sen sơ: 32 mm
– Nhiệt độ hoạt động: -31⁰C đến + 63⁰C.
– Đầu ra tín hiệu: Cổng RS 232 kỹ thuật số hoặc USB để truyển dữ liệu với các máy tính hoặc công nghệ Bluetooth; có tai nghe.
– Đầu ra tín hiệu: Hệ thống định vị SEPOS.
– Đồng bộ gồm: Hộp điều khiển, ống sen sơ, thanh mang, dây đeo, tai nghe ngoài, pin, ba lô mềm, hộp cứng đựng máy, sách hướng dẫn sử dụng.
Kit with all hardware for surface, borehole, and underwater use
Modular magnetometer system for UXO detection down to great depths
Polarity dependent alarm indication by LED and audio signal
Interfaces: USB, Bluetooth® and serial
Direct communication to VALLON Hard- and Software for data-logging.
No sensor adjustment required
Detachable digital probe VSM for flexible use in all VALLON multichannel systems
The VX1 is a modular UXO detector system for ferrous object detection. It is extremely rugged and offers high search sensitivity.
It offers easy operation and meets the toughest demands in civil, humanitarian, and military ordnance disposal. This versatile device quickly collects data in conjunction with data acquisition devices from VALLON. For professional data analysis and documentation, VALLON’s product portfolio offers corresponding software solutions.
In addition, the detachable digital probe VSM offers the flexibility for use in all VALLON multichannel systems.
Suitable for following searches …
UXO: Ideally suited for searching for ferromagnetic objects of all kinds (such as unexploded ordnance, etc.), also for data acquisition.
Underwater: Also suited for underwater use.
Borehole: Optimized set for use in boreholes – optionally alternatively available as set with SEPOS® positioning system.
Measuring range up to ± 300,000 nT
Rugged construction and low weight
Fast start-up
Simple operation
No sensor calibration required
Android app EVA4mobile® for recording borehole and surface data
Powerful 5.3-inch VFC4 field computer for processing extremely large data volumes
The VXB3 borehole detector together with its components provides an extremely reliable detection system for locating ferromagnetic objects in soil. As a result, it meets the toughest borehole detector performance requirements in civil and humanitarian ordnance removal.
The survey data can be displayed and reviewed immediately on the VALLON field computer VFC4 as a curve. The data can be analyzed on the desktop PC in detail later using VALLON evaluation software available as an option.
Suitable for following searches …
UXO : Ideally suited for borehole search for ferromagnetic objects of all kinds (such as unexploded ordnance, etc.), with data acquisition.
Underwater : Also suited for underwater use.
Borehole : Optimized for use in boreholes – ready for use with optional SEPOS® detector.
Đánh giá
Chưa có đánh giá nào.