Alco-Sensor VXL for DOT Testing SKU: 208-DOT
Alco-Sensor VXL for DOT Testing
The Alco-Sensor VXL for DOT Testing is offers a fast testing protocol and is ideal for regulated and non-regulated workplace testing programs.
Approved by the U.S. DOT as an Evidential Breath Testing device
Great for Regulated and Non-Regulated workplace testing programs
Evidential accuracy exceeds +/- .005 at .100 BrAC
Intuitive menus prompt the operator through the DOT testing sequence, greatly reducing operator errors
Data Lite software version offers a fast testing protocol, eliminating unnecessary data entry and taking the operator directly to the test procedure
Automatic breath sampling ensures that each subject delivers an adequate breath sample, and then samples the breath at the optimum moment towards the end of the subjects exhalation
A manual breath sampling feature allows the operator to manually capture a breath sample from a subject with breathing difficulties or is being uncooperative
Automatically initiates a :15 wait period following a positive screening test of .02
Automatically initiates a confirmation test following the :15 wait period
Thousands of tests can be stored and printed in the device’s memory
Operates independently of the printer, allowing the operator to test the subject without being tethered to the printer
Right or Left handed operation makes testing fast and easy
Optional Slip printer or Martel Thermal Printer
Optional Barometer interprets the value of alcohol gas tanks when performing Accuracy Checks and Calibration Adjustments. The barometer eliminates the need for a separate device such as the True-Cal II or an elevation chart when performing Accuracy Checks and Calibration Adjustments, and offers a higher degree of accuracy when using Alcohol Gas Tank calibration standards.
| Alco-Sensor VXL Product Specifications | |
| Specs | |
| Sensor type | Electrochemical oxidation (fuel cell) |
| Range of Measurement | 0.00 – 0.440 BrAC |
| Accuracy and Precision | US DOT approved for evidential use |
| Breath sampling | Automatic with manual override |
| Response time | 3 – 5 seconds for negative results, 5 10 seconds for positive results |
| Power requirement | 4, AA batteries (included) |
| Test mode | Direct and passive |
| Calibration | Microprocessor controlled, using gas or simulator |
| Memory | Thousands of tests |
| Print capability | Yes, with docking station and serial printer |
| Computer capability | Yes, with docking station and optional Accelerator software |
| Temperature range | -5 degrees C to 50 degrees C |
| Size | 7 x 3 x 2 1/8, 12 oz |
| Warranty | Two year, parts and labor |
Sản phẩm tương tự
Alco-Sensor RBT IV for DOT Testing
The Intoximeters Alco-Sensor RBT IV for DOT testing is the most widely used instrument available and is ideal for workplace alcohol testing programs.
Approved by the U.S. DOT as an Evidential breath alcohol tester
Great for Regulated and Non-Regulated workplace testing programs
Evidential accuracy exceeds +/- .005 at .100 BrAC
Lightweight and portable for on-site testing
Easy, straight-forward test protocol with no unnecessary data input make for a faster testing sequence
Exceptional accuracy and durability
The hand-held Alco-Sensor IV connects to the battery-powered RBT IV printer to produce a totally portable DOT-compliant alcohol testing system
Alco-Sensor IV and RBT IV printer displays prompt the operator through a DOT test procedure, reducing operator error
A Screening test of .020 or greater triggers an automatic 15-minute countdown on the RBT IV printer display
Following a positive Confirmation test of .020 or greater, the RBT IV printer further prompts the operator to perform an Accuracy Check
RBT IV printer function keys start common testing procedures by pressing a single button: Screening test, Confirmation test, Calibration Adjustment, and Accuracy Check.
Automatic and manual breath sampling capability
Waterproof Pelican case protects the instrument and printer from extreme weather and rough treatment
A 12 volt rechargeable battery powers the RBT IV printer and maintains its charge for up to 50 tests
Printer cables and battery connections are secured under the foam cut outs within the case
RBT IV printer prints results on tamper evident printer paper or 3-ply paper
Easily and quickly conduct monthly Accuracy Checks and, if needed, Calibration Adjustments
Alco-Sensor IV with Memory and Slip Printer
The Alco-Sensor IV with Memory and Slip Printer for DOT Testing SKU: 213-SLP is intended for Regulated and Non-Regulated workplace testing programs that are stationary. The Alco-Sensor IV with Memory is:
Approved by the U.S. DOT as an evidential breath alcohol testing device
Evidential accuracy exceeds +/- .005 at .100 BrAC
Great for stationary Regulated and Non-Regulated workplace testing programs
LED display prompts the operator through a DOT testing sequence, greatly reducing operator error
Automatic breath sampling triggers when the subject delivers a continuous deep lung breath sample
Device is engineered with manual breath sampling capabilities for subjects with shy lung or uncooperative subject
Automatic 15-minute wait period countdown following a positive screening test result of .020 or greater
Automatically begins a confirmation test following the 15 minute wait period
Stores over 70 test results in memory
Connects to a Slip Printer which prints results directly onto the Alcohol Testing Form (ATF)
Test records print the test result, device serial number, test number, date and time of test and Air Blank results directly onto the ATF
Computer capable: Total Recall software facilitates uploading test results to a computer and generates customized reports from a database of test results
Two year factory warranty
Alco-Sensor III Breathalyzer with Mini Alcohol Gas Can SKU: 204
The Alco-Sensor III Breathalyzer with Mini Alcohol Gas Can SKU: 204 is widely used by substance abuse treatment professionals and is:
Approved by the U.S. DOT as an evidential breath testing device
Approved in almost every state as a PBT (Preliminary Breath Tester)
Evidential Accuracy to +/- .005 BAC.
Displays breath alcohol results to three decimal places
Fuel cell sensor detects and reads alcohol only
Easy two-button operation
Display prompts the operator through a test sequence, greatly reducing operator error
When pressed, the READ button captures a breath sample for analysis
Displays test results within seconds
Re-display results by pressing the READ button a second time
Mouthpiece ejector button
GSA Pricing available for Federal Agencies
Secure Calibration Procedure eliminates accidental tampering or unauthorized calibration adjustments
Alco-Sensor IV with Memory for Law Enforcement
The Alco-Sensor IV with Memory for Law Enforcement SKU: 206M-Non and Corrections industries is the most economical and portable breath testing system available, and is:
Approved by the U.S. DOT as an evidential breath alcohol testing device
Widely used by Law Enforcement and Correction facilities as a PBT (Preliminary Breath Tester)
Evidential accuracy exceeds +/- .005 at .100 BrAC
Automatic and manual breath sampling
Total portable breath alcohol testing system
Stores over 70 test results in memory
Able to connect to Martel Thermal, DP1012, or Slip printers
Each test record prints the device serial number, test number, date and time of test as well as a line for the operator’s signature to document chain of custody of test results
Computer capable: Total Recall software facilitates uploading test results to a computer and generates customized reports from a database of test results
One year factory warranty
Đánh giá
Chưa có đánh giá nào.