METAL DETECTION FOR TEXTILES, FLEECE AND WEBS METAL SHARK® FL & FL compact
[button link=”https://drive.google.com/file/d/1pS1Pxrb6doSbkfP_j2Ie7mXJ7N1TkrxH/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects magnetic and non-magnetic metals in fabrics and webs
Particularly flat for optimal approach to ascending or descending product paths, FL compact additionally rotatable
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Maintenance-free with automatic balance and calibration control
Features
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
IFS and HACCP reports easily available on the display at the touch of a button
Cyclical function monitoring with Performance Validation System (PVS)
Optionally: Data transfer to USB interface or connection to the company net-work via SHARKNET® softwareFunction
The METAL SHARK® FL and FL compact metal detectors are usually used for the inspection of nonwovens, textiles and films.
Both detectors are particularly flat and available in widths of 1,000 – 4,000 mm. The FL compact is rotatably mounted so that it can also be adapted to sloping webs.
Due to the high sensitivity of the FL models, tiny magnetic and non-magnetic metal particles (e.g. iron, aluminium and stainless steel) are detected over the entire width.
Specifications
Electronics | Digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit |
Input | 2 analogue 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons |
Output | 2 floating: “error” and “metal” 8 freely configurable 24 V DC signals |
Inspection method | High-frequency magnetic field, multi-channel operation, balanced receiver coils |
Metal detection | Ferrous, non-ferrous (e.g. aluminium, lead etc.) and stainless steel |
Product compensation | 250 memory locations, automatic product compensation, with TeachAssistant |
Enclosure rating | Controller IP65, sensor IP54 (optionally IP66) |
Environmental conditions | Controller: -20°C to +40°C / -4°F to +104°F, optionally to -40°C / -40°F or +55°C / 131°F, rel. humidity 20% to 90% (non-condensing) Sensor: -30°C to +60°C / -22°F to 140°F, optionally up to +90°C / 194°F |
Temperature of goods inspected | Standard: -30°C to +40°C /-22°F to +104°F Optionally: -40°C to +60°C / -40°F to 140°F |
Power Supply | 1 phase 110-230 V AC +/- 5%, 20 W typ. (60 W max.) |
Interface | RS232, LAN (optional, for SHARKNET®), USB (optional) |
Maintenance | Maintenance-free, sensors calibrate themselves |
Diagnostics | Integrated diagnostic software, automatic self-test |
SHARKNET® | The SHARKNET® software connects METAL SHARK® metal detectors with a central computer, providing centralized storage of all operating data plus batch and alarm documentation for HACCP and IFS compliance. |
LPW/HPW | Increase of the IP protection class by adapting the sensor seal, installing additional seals and a double housing for the control electronics |
Temperature extension cold | Temperature range extended to -40°C (-40° F) Resin seals remain elastic at low temperatures. Special insulation, heated enclosure and other features. |
Temperature extension hot | Temperature range extended to +55° C, (+131° F) Adapted enclosure, additional thermal insulation, replaceable filter fan, heat exchanger and/or active cooling units. |
High temperature extension for product | Goods temperature up to +120°C (248° F) max. This option provides IP54 grade enclosure for the sensor. |
Signalling devices (optical/acoustic) | Stacking lights and signal horns/sirens available in different versions and IP protection classes |
Sản phẩm tương tự
[button link=”https://drive.google.com/file/d/1NVMEb_pzVHepcMp42byKw-ntmWa_FuPw/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metal contaminants in liquid and pasty products
Easy to integrate into common pipeline systems, diameter from 1“–6“ / 25-150 mm
Stainless steel housing and frame are easy to clean, supplied tube is CIP-capable (Cleaning In Place)
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation through autocalibration and TeachAsssistant
Function
The METAL SHARK® IN Liquid is developed for liquid and pasty products. With its maintenance-free design and high-quality, hygienic construction, the metal detector is ideal for reliable use in the food industry.
METAL SHARK® IN Liquid can be easily integrated into all common piping systems for pumps, vacuum fillers or even sausage meat filling plants.
Three different valve models, optimally adapted to the respective product, guarantee a safe discharge of metallic contaminants.
Reliably detects metals in free-falling goods
Simple assembly due to mounting frame and quick release rings
Highest sensitivity with 4-quadrant technology
Autocalibration and TeachAssistant for intuitive control and easy installation
Maintenance-free through automatic balance and calibration control
ATEX-version for use in explosion endangered environments
BRC-Kit option: Conformity with the Global Standard of the British Retail Consortium (BRC) for food safety
Function
The METAL SHARK® GF (Gravity Feed) is used for pipelines with free-falling products to detect metal contamination in continuously flowing granulates or powders such as sugar, flour, grain or even plastic granules.
The sensitive sensors detect the smallest metal contaminants, and fast-switching separation flaps discharge them directly from the product stream during ongoing production.
[button link=”https://drive.google.com/file/d/1pEBopERQ0AygrArHspvQc7pUgSXS-vfk/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Detects metal contaminants in plates and webs
Precise metal detection with multi-segment sensor saves valuable material
Highest sensitivity through 4-quadrant technology
Intuitive control and easy setup with autocalibration and Teach Assistant
Maintenance-free through automatic balance and calibration control
Features
Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory spaces for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Detects the position of the metal contamination in the fabric
Sensitivity: Detects iron from 0.6 mm and stainless steel from 0.7 mm
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® COMBI TU is a multi-segment sensor typically used over fabric, non-woven or paper webs as well as plates of different materials. It detects the smallest metal particles from 0.6 mm and localizes their position in defined segments of the product.
The METAL SHARK® COMBI TU is suitable for widths up to
5 m/16.6 ft and more available. It can be easily operated in humid environments with ambient temperatures from -10˚C to +40˚C and product temperatures up to 65°C.
Accessories & Extras
The METAL SHARK® COMBI TU can be perfectly adapted to your production by various special designs and accessories. Various temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”https://drive.google.com/file/d/1_EXMQDEljiovgIMGoaCQUl6KlE7G9Jp9/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Extremly resistant to weather, dirt or impact of stones and also immune to vibration
Simple and timesaving mounting: belt must not be devided due to a devidable probe
Can be used in the proximitry of frequency converters
Low difference in sensitivity on different sensing heights above the belt
CE-certified
Features
Average sensitivity (from M40 nuts)
Nearly homogeneous sensitivity on the belt and in the upper layers of the product
Can be used close to frequency converters, only 1 m minimum distance between probe and motors or magnets
Passage widths from 1 m to 2.4 m and heights can be adjusted as required
Extremely robust design
Very simple operation
Monitoring and display of internal parameters. (Helpful when calling for telephone support)
Function
The PSQ RA series of metal detector (opterating with a frame-probe) detects all kinds of metal, which means not only iron, but also aluminium, stainless steel, copper or mild steel.
The specialty of this detector is a low difference between edge and center of probe aperture. Therefore it is especially suitable if the depth of burden on the belt is more tan 600 mm. It’s frame can be devided and easily be built around the belt.
This metal detector prevents damage, avoids downtimes and produces significant savings on repair costs.
Đánh giá
Chưa có đánh giá nào.