METAL DETECTOR FOR LARGE PRODUCTS METAL SHARK® BIG
[button link=”https://drive.google.com/file/d/1vNrtKa6nE96FePk8Lai_RDHN4LDM0NyC/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Sturdy aluminium design – particularly robust and weatherproof with short metal-free zone
Ideal protection for hackers and OSB flakers
High search performance and noise immunity through 4-quadrant technology, even better with Power Drive option
Maintenance-free: automatic calibration and automatic balance control
Easy installation and intuitive operation
Remote control and remote maintenance (option SHARKNET®) with documentation of all settings, metal messages etc.
Features
Aperture width standard up to 2 m x 1.6 m (other sizes on request)
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Easy setup with TeachAssistant
Easy to use with intuitive and multilingual menus
Memory for up to 250 products
Documentation of all events and metal messages
Remote control and remote maintenance via the company network using SHARKNET® software (option)
Extended temperature range down to -40°C / -40°F with specially adapted sensor and specially equipped control unit (option)
4-level password system, automatic logoff after time lapseFunction
The METAL SHARK® BIG with rectangular opening is specially designed for large products such as logs, bales or recycled wood. It detects iron, stainless steel, aluminium etc. precisely and reliably even under difficult conditions.
Thanks to its robust design, it is particularly suitable for industrial use on rough terrain. The typical installation is in a trough conveyor with flat belt, or in a specially prepared vibratory conveyor.
Accessories & Extras
The METAL SHARK® BIG can be perfectly adapted to your production with various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
| Electronics | Digital signal processor, digital frequency generation, digital balance control, automatic calibration, digital noise filters, integrated flexible control functions |
| Input | 2 analog 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons |
| Output | 2 floating: “error” and “metal” 8 freely configurable 24 V DC signals, e.g. solenoid valve, optical/acoustic alarm |
| Inspection method | High-frequency magnetic field, multi-channel operation, balanced receiver coils |
| Metal detection | Ferrous, non-ferrous (e.g. tombac, brass, bronze, aluminium, lead etc.) and stainless steel |
| Product compensation | 250 memory locations, automatic product compensation, with TeachAssistant |
| Enclosure rating | IP 65 |
| Environmental conditions | -30°C to +40°C / -22°F to +104°F (UL version: -20°C to +40°C / -4°F to +104°F) option: to -40°C / -40°F or +55°C / +131°F, rel. humidity 20% to 90% non-condensing; >95% relative humidity (condensing) with closed switch cabinet |
| Product Temerature | up to 70°C / 158°F |
| Power Supply | 1 phase 110-230 V AC +/- 5% 20 W typ. (60 W max.) |
| Interface | RS232, LAN (optional, for SHARKNET®), USB (optional) |
| Maintenance | Maintenance-free, sensors calibrate themselves |
| Diagnostics | Integrated diagnostic software, automatic self-test |
| Fast Power Drive (FPD) | Improves metal detection and reliability in industrial environments that do not meet electromagnetic compatibility standards, various IP protection classes possible, ATEX Zone 22 possible. |
| SHARKNET® | The SHARKNET® software connects METAL SHARK® metal detectors to a central computer and offers central storage of all operating data as well as batch and alarm documentation and remote control and remote maintenance from a PC. |
| Temperature extension (cold) | Temperature range extended to -40°C / -40°F, resin seals remain elastic at low temperatures. Special insulation, heated enclosure and other features. |
| Temperature extension (hot) | Temperature range extended to +55°C / +131°F, adapted enclosure, additional thermal insulation, replaceable filter fan, heat exchanger and/or active cooling units. |
| Signalling devices (optical/acoustic) | Stacking lights and signal horns/sirens available in different versions and IP protection classes. |
Sản phẩm tương tự
[button link=”https://drive.google.com/file/d/15w4V_2y1W2CO0PSFPNBXqUt865Q2KS0E/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Optimally adapted to the monitoring of entire tree trunks
Sensor diameter up to 1.8 m (further sizes on request)
Sturdy stainless steel design: particularly robust and with short metal-free zone
Maintenance-free with automatic balance and calibration control
Sturdy stainless steel design: particularly robust and with short metal-free zone
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Features
Sensor diameter up to 1.8 m (further sizes on request)
Robust against environmental influences such as high and low temperatures
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Easy to use with intuitive and multilingual menus
Memory for up to 250 products
Maintenance-free with Autocalibration
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
4-level password system, automatic log out after time lapse
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® OCTA has been developed for industrial applications in the timber industry and sawmills. It detects magnetic and non-magnetic metal contaminants (iron, tombac, brass, stainless steel, etc.) precisely and reliably even under difficult conditions.
The octagonal shape makes it ideal for monitoring logs for metal parts such as shrapnel, bullet fragments, nails, screws, etc.
It is typically installed in troughed conveyor belts.
Accessories & Extras
The METAL SHARK® OCTA can be perfectly adapted to your production by various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”https://drive.google.com/file/d/1pEBopERQ0AygrArHspvQc7pUgSXS-vfk/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Detects metal contaminants in plates and webs
Precise metal detection with multi-segment sensor saves valuable material
Highest sensitivity through 4-quadrant technology
Intuitive control and easy setup with autocalibration and Teach Assistant
Maintenance-free through automatic balance and calibration control
Features
Maximum inspection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory spaces for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Detects the position of the metal contamination in the fabric
Sensitivity: Detects iron from 0.6 mm and stainless steel from 0.7 mm
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® COMBI TU is a multi-segment sensor typically used over fabric, non-woven or paper webs as well as plates of different materials. It detects the smallest metal particles from 0.6 mm and localizes their position in defined segments of the product.
The METAL SHARK® COMBI TU is suitable for widths up to
5 m/16.6 ft and more available. It can be easily operated in humid environments with ambient temperatures from -10˚C to +40˚C and product temperatures up to 65°C.
Accessories & Extras
The METAL SHARK® COMBI TU can be perfectly adapted to your production by various special designs and accessories. Various temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”https://drive.google.com/file/d/1_EXMQDEljiovgIMGoaCQUl6KlE7G9Jp9/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Extremly resistant to weather, dirt or impact of stones and also immune to vibration
Simple and timesaving mounting: belt must not be devided due to a devidable probe
Can be used in the proximitry of frequency converters
Low difference in sensitivity on different sensing heights above the belt
CE-certified
Features
Average sensitivity (from M40 nuts)
Nearly homogeneous sensitivity on the belt and in the upper layers of the product
Can be used close to frequency converters, only 1 m minimum distance between probe and motors or magnets
Passage widths from 1 m to 2.4 m and heights can be adjusted as required
Extremely robust design
Very simple operation
Monitoring and display of internal parameters. (Helpful when calling for telephone support)
Function
The PSQ RA series of metal detector (opterating with a frame-probe) detects all kinds of metal, which means not only iron, but also aluminium, stainless steel, copper or mild steel.
The specialty of this detector is a low difference between edge and center of probe aperture. Therefore it is especially suitable if the depth of burden on the belt is more tan 600 mm. It’s frame can be devided and easily be built around the belt.
This metal detector prevents damage, avoids downtimes and produces significant savings on repair costs.
[button link=”https://drive.google.com/file/d/1b7OBWPwwl17y7OM3o7M1bFgPnmPcKDH9/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Specially designed for the monitoring of wood, fibre boards or any wide but thin product
AutoSens technology for automatic adjustment of the sensitivity to the mat height
Maintenance-free with automatic balance and calibration control
Durable aluminium design: particularly robust and easy to clean
Highest sensitivity with 4-quadrant technology
Autocalibration and Teach Assistant for intuitive control and easy installation
Features
Aperture widths from 1 m to 5 m as a standard (further sizes on request)
Maximum search performance with hig-hest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Easy to use with intuitive and multilingu-al menus
Memory for up to 250 products
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® BIG pba with rectangular opening at a rather low opening height is especially designed for monitoring fibre mats, MDF, OSC or chipboard as well as other panel materials.
The typical installation takes place around a conveyor belt with flat belt.
Using 3D detection technology, it detects magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminium etc.) precisely and reliably even under difficult conditions.
Accessories & Extras
The METAL SHARK® BIG pba can be perfectly adapted to your production with various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
Đánh giá
Chưa có đánh giá nào.