METAL DETECTOR FOR STONE AND EARTH PROCESSING Metal detector QLC/QLCTA
[button link=”https://drive.google.com/file/d/1VsV1-_LD80DdyLconHkAk96eVwsQMIPo/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Monitors bulk materials in the building materials industry or mining
Self-adjusting and extremely easy to install
High-quality components ensure reliability and long service life
Detects ferrous and non-ferrous metals, iron oxide and ore are ignored
Probe and amplifier are immune to vibration and resistant to weather, dirt and stone chips
Particularly robust and easy to clean
Features
Good sensitivity (M10 nuts) at belt speed of 0.3 – 6 m/s
Very simple operation
Can be used close to frequency conver-ters, only 2 m minimum distance between probe and motors or magnets
Belt widths from 500 mm to 2,000 mm
Monitoring and display of internal para-meters
Optional: Realization as tandem for higher debris heights
Optional: complete suppression of magnetite Fe3O4
Function
The QLC and QLCTA metal detectors offer good metal sensitivity for monitoring bulk materials in the mining and construction materials industry.
At a belt speed of 0.3 – 6.0 m/s they easily detect metal parts of the size of about M10 nuts and larger.
For higher sensitivity (M6 nuts) at a belt speed of max. 4.0 m/s we recommend the metal detectors SQ and SQTA.
Specifications
| QLC and QLCTA | |
| Input Signals | Sensor and coaxial cable |
| Output Signals | Metal alarm relay with 2 potential-free changeover contacts, switching capacity 230V/6A |
| Metal Detection | Iron, non-ferrous (e.g. aluminium or copper), largely ignores ores Optional: complete blanking of magnetite Fe304 |
| Belt widths | 500 – 2,000 mm |
| Belt speed | 0.3 – 6.0 m/s |
| Protection Type | IP55 |
| Ambience | -20° C up to +55° C |
| Power Supply | 230V 15 Hz +/- 15%, typ. consumption 15 VA |
| Controller | Sheet steel housing, prepared for wall mounting, 9 kg |
| Types | Mono (QLC) for lower debris heights, tandem (QLCTA) for higher debris heights |
| Sensitivity | from steel nuts M10 |
Sản phẩm tương tự
[button link=”https://drive.google.com/file/d/15w4V_2y1W2CO0PSFPNBXqUt865Q2KS0E/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Optimally adapted to the monitoring of entire tree trunks
Sensor diameter up to 1.8 m (further sizes on request)
Sturdy stainless steel design: particularly robust and with short metal-free zone
Maintenance-free with automatic balance and calibration control
Sturdy stainless steel design: particularly robust and with short metal-free zone
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Features
Sensor diameter up to 1.8 m (further sizes on request)
Robust against environmental influences such as high and low temperatures
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Easy to use with intuitive and multilingual menus
Memory for up to 250 products
Maintenance-free with Autocalibration
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
4-level password system, automatic log out after time lapse
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® OCTA has been developed for industrial applications in the timber industry and sawmills. It detects magnetic and non-magnetic metal contaminants (iron, tombac, brass, stainless steel, etc.) precisely and reliably even under difficult conditions.
The octagonal shape makes it ideal for monitoring logs for metal parts such as shrapnel, bullet fragments, nails, screws, etc.
It is typically installed in troughed conveyor belts.
Accessories & Extras
The METAL SHARK® OCTA can be perfectly adapted to your production by various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”https://drive.google.com/file/d/1b7OBWPwwl17y7OM3o7M1bFgPnmPcKDH9/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Specially designed for the monitoring of wood, fibre boards or any wide but thin product
AutoSens technology for automatic adjustment of the sensitivity to the mat height
Maintenance-free with automatic balance and calibration control
Durable aluminium design: particularly robust and easy to clean
Highest sensitivity with 4-quadrant technology
Autocalibration and Teach Assistant for intuitive control and easy installation
Features
Aperture widths from 1 m to 5 m as a standard (further sizes on request)
Maximum search performance with hig-hest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Easy to use with intuitive and multilingu-al menus
Memory for up to 250 products
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® BIG pba with rectangular opening at a rather low opening height is especially designed for monitoring fibre mats, MDF, OSC or chipboard as well as other panel materials.
The typical installation takes place around a conveyor belt with flat belt.
Using 3D detection technology, it detects magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminium etc.) precisely and reliably even under difficult conditions.
Accessories & Extras
The METAL SHARK® BIG pba can be perfectly adapted to your production with various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”https://drive.google.com/file/d/1pkXkZ1Tdbz1a3SX90FU7l4mfUz981Nja/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGt[/button]
Detects metal contaminants in small, free-falling products such as hygiene articles
Highest accuracy in the detection of magnetic and non-magnetic metal contaminants
FDA conformity of all parts in contact with the product
Hygienic design for use in the hygiene, pharmaceutical or food industry
Intuitive control, auto-calibration and TeachAssistant
Features
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Storage spaces for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
IFS and HACCP reports available on the display at the touch of a button
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® R offers the highest performance in detecting magnetic and non-magnetic metals. Typical applications are found in the medical-pharmaceutical sector as well as in the sanitary or food industry and for all kinds of chemical powders.
The product falls through the R sensor head and an optional reject unit. With the reject unit the smallest metal objects are promptly ejected from the flow of goods. Metal particles are automatically rejected.
The reject unit is suitable for tube diameter 10 to 50 mm, Reject timing is automatically by metal detector control box. Pneumatically driven.
The hygienic housing is easy to clean, all materials in contact with the product are FDA-approved quality (PTFE and stainless steel).
[button link=”https://drive.google.com/file/d/1CfN0n6N2gAYLPOIjpp5Q_ZFbII4yZMu7/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metals in packaged and unpackaged products on conveyor belts
Removable sides make it particularly easy to install, ideal for conveyors that cannot be split
Highest sensitivity with 4-quadrant technology
Autocalibration and TeachAssistant for intuitive control and easy setup
Maintenance-free due to automatic balance and calibration control
Function
Metal detector METAL SHARK® TU is used in combination with conveyor belts or chutes when they cannot be divided or dismantled. The sidewalls of the TU can be removed so that the sensor plates can be easily pushed over and under the belt.
Thanks to its 4-quadrant technology, it detects magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminum etc.) precisely and reliably. The robust stainless steel housing is easy to clean and robust and therefore suitable for many industries.
Đánh giá
Chưa có đánh giá nào.