Alco-Sensor IV for Law Enforcement SKU: 206
Alco-Sensor IV for Law Enforcement
The Alco-Sensor IV for Law Enforcement and Corrections industries is the most economical, hand-held breath tester available, and is:
Approved by the U.S. DOT as an evidential breath alcohol testing device
Widely used by Law Enforcement and Correction facilities as a PBT (Preliminary Breath Tester)
Evidential accuracy exceeds +/- .005 at .100 BrAC
Alco-Sensor IV monitors a subjects breath and performs a test only when the subject delivers a continuous deep breath sample
Operator can manually override the automatic breath sample feature to test subjects with shy lung or who are uncooperative
LED display messages guide the operator through the test procedure, greatly reducing operator error
Displays test results as a three-digit number
More precise, accurate results
Able to connect to an RBT IV printer to give a printed record of test results
One year factory warranty
We are the only company authorized to provide technical support and repair services…so you get continued support well after the sale.
| Alco-Sensor IV for Law Enforcement Specifications | |
| Sensor type | Electrochemical Oxidation (fuel cell) |
| Range of measurement | .000 – .400 BrAC |
| Accuracy and precision | U.S. DOT approved for evidential use |
| Breath sampling | Automatic with manual override |
| Response time | 5 – 10 seconds negative results, 10 – 30 seconds positive results |
| Power requirement | 9-volt battery (included) |
| Test mode | Direct |
| Calibration | Microprocessor controlled, using gas or wet bath simulator |
| Memory | Last test |
| Print capability | Yes, with RBT IV printer |
| Computer capability | Yes, blue dot version only, Alco-Sensor IV @ Work software |
| Temperature range | 0 – 40 degrees C |
| Size | 3 x 5 x 1 , 11 oz. |
| Warranty | One year parts and labor |
Sản phẩm tương tự
Alco-Sensor IV with Memory System for DOT Testing
The Alco-Sensor IV with Memory system for DOT and non-regulated workplace testing programs is an economical and portable breathalyzer, and is:
Approved by the U.S. DOT as an evidential breath alcohol testing device
Evidential accuracy exceeds +/- .005 at .100 BrAC
Great for Regulated and Non-Regulated workplace testing programs
LED display prompts the operator through a DOT testing sequence, greatly reducing operator error
Automatic and manual breath sampling for greater precision
Automatic 15-minute wait period countdown following a positive screening test result of .020 or greater
Portable breath alcohol testing system
Stores over 70 test results in memory
Connects to a rechargeable battery operated Martel Thermal Printer for smudge free print results
Each test record prints the device serial number, test number, date and time of test as well as a line for the operator’s signature to document chain of custody of test results
Computer capable: Total Recall software facilitates uploading test results to a computer and generates customized reports from a database of test results
Two year factory warranty
We are the only company authorized to provide technical support and repair services…so you get continued support long after the sale.
Alco-Sensor IV for DOT Testing SKU: 206-BLUE
The Alco-Sensor IV for DOT testing and non-regulated workplace testing is the most economical device, and is:
Approved by the U.S. DOT as an evidential breath alcohol testing device
Great for Regulated and Non-Regulated workplace testing programs
Evidential accuracy exceeds +/- .005 at .100 BrAC
LED display prompts the operator through a DOT testing sequence, greatly reducing operator error
Automatic breath sampling triggers when the subject delivers a continuous deep lung breath sample
Device is engineered with manual breath sampling capabilities for subjects with shy lung or uncooperative subjects
Can be used as an alcohol screening device
Able to connect to the RBT IV printer or to a computer running the Alco-Sensor IV @ Work Software
When connected to the RBT IV printer, the Alco-Sensor IV will conduct a confirmation test following the :15 wait countdown period and print both screening and confirmation test results
Test results display in seconds
Two year factory warranty
Alco-Sensor VXL with Slip Printer
The Alco-Sensor VXL with Slip Printer offers a fast testing protocol and is ideal for workplace testing programs that are stationary. Not considered to be a portable system.
Approved by the U.S. DOT as an Evidential Breath Testing device
Evidential accuracy exceeds +/- .005 at .100 BrAC
Intuitive menus prompt the operator through the DOT testing sequence, greatly reducing operator errors
Data Lite software version offers a fast testing protocol, eliminating unnecessary data entry and taking the operator directly to the test procedure
Automatic breath sampling ensures that each subject delivers an adequate breath sample, and then samples the breath at the optimum moment towards the end of the subjects exhalation
A manual breath sampling feature allows the operator to manually capture a breath sample from a subject with breathing difficulties or is being uncooperative
Automatically initiates a :15 wait period following a positive screening test of .02
Automatically initiates a confirmation test following the :15 wait period
Store and print thousands of test from the device’s internal memory
Right or Left handed operation makes testing fast and easy
Operates independently of the printer, allowing the operator to test the subject without being tethered to the printer
Docking station provides secure connection to the Slip Printer
Slip printer prints results directly onto the Alcohol Test Form, eliminating the need for printer paper and tamper tape
Optional Barometer interprets the value of alcohol gas tanks when performing Accuracy Checks and Calibration Adjustments. The barometer eliminates the need for a separate device such as the True-Cal II or an elevation chart when performing Accuracy Checks and Calibration Adjustments, and offers a higher degree of accuracy when using Alcohol Gas Tank calibration standards.
Alco-Sensor RBT V Data Lite System
The Alco-Sensor RBT V Data Lite system is an economical and portable breath alcohol testing device from Intoximeters. This system is programmed with a DOT Quick Test protocol which captures minimal subject testing data, quickly guiding the operator through a test sequence. The full keyboard makes data entry fast and easy. The system includes a NRC testing protocol that can be selected from the main menu.
Approved by the U.S. DOT as an evidential breath alcohol testing device
Great for Regulated and Non-Regulated workplace testing programs
Programmed with DOT and NRC testing protocols
Evidential accuracy exceeds +/- .005 at .100 BrAC
Easy to read prompts guide the operator through the testing sequence, greatly reducing operator errors
Intuitive menus gives the operator quick access to DOT quick test protocols and multiple features
Automatic and manual breath sampling capability
Keyboard allows operator to input Donor’s name and ID number
Automatically initiates a :15 wait period following a positive screening test of .02
Automatically initiates a confirmation test following the :15 wait period
Hundreds of tests can be stored and printed in the device’s memory
The Martel thermal printer prints results without the mess of ink printers
Operates independently of the Martel thermal printer, allowing the operator to test the subject without being tethered to the printer
Operator places the Alco-Sensor VXL into the docking station to quickly print test results. This fail-safe printing method removes any question about the integrity of the printed test result, and removes the issues that sometimes arise with wireless communication technology
Đánh giá
Chưa có đánh giá nào.