METAL DETECTION FOR TEXTILES, FLEECE AND WEBS METAL SHARK® FL & FL compact
[button link=”https://drive.google.com/file/d/1pS1Pxrb6doSbkfP_j2Ie7mXJ7N1TkrxH/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects magnetic and non-magnetic metals in fabrics and webs
Particularly flat for optimal approach to ascending or descending product paths, FL compact additionally rotatable
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Maintenance-free with automatic balance and calibration control
Features
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
IFS and HACCP reports easily available on the display at the touch of a button
Cyclical function monitoring with Performance Validation System (PVS)
Optionally: Data transfer to USB interface or connection to the company net-work via SHARKNET® softwareFunction
The METAL SHARK® FL and FL compact metal detectors are usually used for the inspection of nonwovens, textiles and films.
Both detectors are particularly flat and available in widths of 1,000 – 4,000 mm. The FL compact is rotatably mounted so that it can also be adapted to sloping webs.
Due to the high sensitivity of the FL models, tiny magnetic and non-magnetic metal particles (e.g. iron, aluminium and stainless steel) are detected over the entire width.
Specifications
Electronics | Digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit |
Input | 2 analogue 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons |
Output | 2 floating: “error” and “metal” 8 freely configurable 24 V DC signals |
Inspection method | High-frequency magnetic field, multi-channel operation, balanced receiver coils |
Metal detection | Ferrous, non-ferrous (e.g. aluminium, lead etc.) and stainless steel |
Product compensation | 250 memory locations, automatic product compensation, with TeachAssistant |
Enclosure rating | Controller IP65, sensor IP54 (optionally IP66) |
Environmental conditions | Controller: -20°C to +40°C / -4°F to +104°F, optionally to -40°C / -40°F or +55°C / 131°F, rel. humidity 20% to 90% (non-condensing) Sensor: -30°C to +60°C / -22°F to 140°F, optionally up to +90°C / 194°F |
Temperature of goods inspected | Standard: -30°C to +40°C /-22°F to +104°F Optionally: -40°C to +60°C / -40°F to 140°F |
Power Supply | 1 phase 110-230 V AC +/- 5%, 20 W typ. (60 W max.) |
Interface | RS232, LAN (optional, for SHARKNET®), USB (optional) |
Maintenance | Maintenance-free, sensors calibrate themselves |
Diagnostics | Integrated diagnostic software, automatic self-test |
SHARKNET® | The SHARKNET® software connects METAL SHARK® metal detectors with a central computer, providing centralized storage of all operating data plus batch and alarm documentation for HACCP and IFS compliance. |
LPW/HPW | Increase of the IP protection class by adapting the sensor seal, installing additional seals and a double housing for the control electronics |
Temperature extension cold | Temperature range extended to -40°C (-40° F) Resin seals remain elastic at low temperatures. Special insulation, heated enclosure and other features. |
Temperature extension hot | Temperature range extended to +55° C, (+131° F) Adapted enclosure, additional thermal insulation, replaceable filter fan, heat exchanger and/or active cooling units. |
High temperature extension for product | Goods temperature up to +120°C (248° F) max. This option provides IP54 grade enclosure for the sensor. |
Signalling devices (optical/acoustic) | Stacking lights and signal horns/sirens available in different versions and IP protection classes |
Sản phẩm tương tự
[button link=”https://drive.google.com/file/d/1av4SiQqk3SbIiPmpV_eQM_-SdkUCAEfJ/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Monitors bulk materials in the mining and building materials industry
Self-adjusting and extremely easy to install
High-quality components ensure reliability and long service life
Detects ferrous and non-ferrous metals, iron oxide and ore are ignored
Probe and amplifier are immune to vibration and resistant to weather, dirt and stone chips
Sturdy aluminium design: particularly robust and easy to clean
Features
High sensitivity (M6 nuts) at belt speed of 0.1 – 4 m/s
Very simple operation
Can be used near frequency converters, only 1 m minimum distance between probe and motors or magnets
Monitoring and display of internal para-meters
Optional: Realization as tandem for higher debris heights
Optional: complete blanking of magneti-te Fe304
Function
The SQ and SQTA metal detectors offer good metal sensitivity for monitoring bulk materials in the mining and construction industry.
They are extremely durable, insensitive to vibrations and resistant to weather, dirt or stone chips. They are easy to install, handle and maintain.
Both are available for belt widths from 500 mm to 1,200 mm. At a belt speed of 0.1 – 4.0 m/s they can easily detect metal parts of the size of about M6 nuts and larger.
For a higher belt speed (M10 nuts) at a belt speed of max. 4.0 m/s we recommend the metal detectors SQ and SQTA.
[button link=”https://drive.google.com/file/d/1bBkhV_C-vhNjbp-rabXpgRCy89qEuv9v/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
X-ray inspection for packaged food or non-food products
Detects high density materials like metal, ceramic, stone or plastic
Easy operation with autocalibration and clearly arranged functions on 17“ touchscreen
XIA software for instant analysis and detection with high accuracy and reliability
Quick release conveyor belt for easy cleaning and maintenance
Features
Real time detection with coloured contamination analysis
Functions for masking of product parts for better detection of contamination
Autosaving of inspection data with time and date stamp
User-friendly operation in daily business with 255 pre-set products
USB and Ethernet for data transfer
Quick release conveyor belt
Easy maintenance and cleaning
Built-in remote control and maintenance
24 hours non-stop operation
TÜV-approved: reliable safety standard, TÜV certficate possible
Function
The XD38 is particularly suitable for packaged food or non-food products, for example in plastic packaging, jars, cartons and even metal foil or metal cans. Unwanted foreign objects such as metal, stones, ceramics or plastic with high density in the product are detected.
The hygienic design allows easy cleaning and maintenance of the device – without the need for tools. This makes the XD38 particularly suitable for all companies and industries that have to ensure high hygiene standards (also available with IP66).
Description
XRAY SHARK® XD38 is particularly suitable for smaller, packaged food or non-food products contained in jars, boxes, plastic packaging and even metal foils or metal cans. Undesirable contaminants such as metal, stone, ceramic, glass or plastic particles with high density can be detected in the product.
The large 17”color touch screen and intuitive software make it easy to use. No special training is needed to operate the x-ray device.
Easy cleaning and maintenance:
The hygienic design allows for easy cleaning and maintenance, without any tools. With the conveyor’s quick release, the conveyor belt can be removed in five easy steps for cleaning. The X-ray protection curtains can be removed by just pushing one button. After cleaning the belt, the curtains can be replaced just as easily, and the device is then quickly ready to resume operation.
Real time detection with colored contamination analysis:
CASSEL x-ray inspection systems provide maximum sensitivity in the detection of foreign bodies. Contaminated products are detected live and can be separated. On the touch screen of the X-ray device contamination is highlighted in red.
Masking functions:
The advanced XIA 3 software program omits certain parts of the product from inspection. This is particularly useful for packaged products, where the actual packaging should not be inspected for foreign bodies. The masking prevents unnecessary false rejection of products.
24 hour non-stop operation:
High-quality components and the advanced technology allow non-stop operation, 24 hours a day, 7 days a week.
Reliable German safety standards – TÜV-approved:
The flawless design offers maximum safety and comfort for daily operating. The radiation leakage rate is 1µSv/h respectively 3 µSv/h or less.
Ethernet and USB:
Connect our x-ray inspection system to your network. CASSEL provides all x-ray machines with USB and Ethernet interfaces as a standard.
Auto storing of inspection data, with time/date stamp:
All data can be stored for quality control. The x-ray machine XRAY SHARK® XD38 has an automatic memory function. The option of storing data only for contaminated products is also available. All data is provided with a time and date stamp. You can easily check this data and analyze it.
Built-in remote maintenance:
If on-site technicians are not available, CASSEL x-ray inspection systems have a built-in remote maintenance function. Our qualified service engineers will help you with any questions, no matter where your x-ray machine is located. That way, expensive travel costs can be saved and quick solutions can be found.
[button link=”#” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]Replace This Text[/button]
Modular conveyor HQ – optimally adapted to use with metal detector METAL SHARK® BD
100% stainless steel – stable construction and easy to clean
Different belt types and various ejection systems for every application, FDA compliant and heat resistant up to 120° C
Accessories such as railing, lights, covers, light sensors can be added individually
BRC-Kit: Conformity with all current standards for machines in the food industry
Function
The HQ conveyor belts are combined with METAL SHARK® BD metal detectors and are mainly adapted to the requirements of the food industry.
The white PU belt is FDA compliant and can be removed in just a few steps. The belt and the stable stainless steel frame can be cleaned easily and quickly and thoroughly.
HQ is a modular system witk a huge variaty of belt types an sizes, rejection systems, railings or coverages.
[button link=”https://drive.google.com/file/d/1nTbasET5JEROGNC7FQ7W5ay-GZL3HboW/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Perfectly suited to the monitoring of entire timber logs
Sturdy aluminium design
particularly robust, weatherproof, with short metal-free zone
Highest detection performance and noise immunity
4-quadrant technology, Power Drive option
Maintenance-free
automatic calibration and automatic balance control
Easy installation and intuitive operation
Remote control and remote maintenance (SHARKNET® option) with documentation of all settings, metal alarms etc.
Features
Standard opening width up to 1.6 m (other sizes on request)
Maximum search performance with hig-hest reliability in the entire detection area due to 4-quadrant technology
Maintenance-free with automatic balance and calibration control
Simple setup with TeachAssistant
Easy to use with intuitive and multilingual menus
Memory for up to 250 products
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
4-level password system, automatic log out after time lapse
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® BIG RD has been developed directly for industrial applications in the timber industry and sawmills.
The detector detects magnetic and non-magnetic metal contaminants (iron, tombac, brass, stainless steel, etc.) precisely and reliably even under difficult conditions.
Due to its round shape it is ideal for monitoring logs for metal parts such as shrapnel, bullet fragments, nails, screws, etc.
It is typically installed in troughed conveyor belts.
Accessories & Extras
The METAL SHARK® BIG RD can be perfectly adapted to your production by various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
Đánh giá
Chưa có đánh giá nào.