METAL DETECTION FOR TEXTILES, FLEECE AND WEBS METAL SHARK® FL & FL compact
[button link=”https://drive.google.com/file/d/1pS1Pxrb6doSbkfP_j2Ie7mXJ7N1TkrxH/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects magnetic and non-magnetic metals in fabrics and webs
Particularly flat for optimal approach to ascending or descending product paths, FL compact additionally rotatable
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Maintenance-free with automatic balance and calibration control
Features
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
IFS and HACCP reports easily available on the display at the touch of a button
Cyclical function monitoring with Performance Validation System (PVS)
Optionally: Data transfer to USB interface or connection to the company net-work via SHARKNET® softwareFunction
The METAL SHARK® FL and FL compact metal detectors are usually used for the inspection of nonwovens, textiles and films.
Both detectors are particularly flat and available in widths of 1,000 – 4,000 mm. The FL compact is rotatably mounted so that it can also be adapted to sloping webs.
Due to the high sensitivity of the FL models, tiny magnetic and non-magnetic metal particles (e.g. iron, aluminium and stainless steel) are detected over the entire width.
Specifications
Electronics | Digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit |
Input | 2 analogue 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons |
Output | 2 floating: “error” and “metal” 8 freely configurable 24 V DC signals |
Inspection method | High-frequency magnetic field, multi-channel operation, balanced receiver coils |
Metal detection | Ferrous, non-ferrous (e.g. aluminium, lead etc.) and stainless steel |
Product compensation | 250 memory locations, automatic product compensation, with TeachAssistant |
Enclosure rating | Controller IP65, sensor IP54 (optionally IP66) |
Environmental conditions | Controller: -20°C to +40°C / -4°F to +104°F, optionally to -40°C / -40°F or +55°C / 131°F, rel. humidity 20% to 90% (non-condensing) Sensor: -30°C to +60°C / -22°F to 140°F, optionally up to +90°C / 194°F |
Temperature of goods inspected | Standard: -30°C to +40°C /-22°F to +104°F Optionally: -40°C to +60°C / -40°F to 140°F |
Power Supply | 1 phase 110-230 V AC +/- 5%, 20 W typ. (60 W max.) |
Interface | RS232, LAN (optional, for SHARKNET®), USB (optional) |
Maintenance | Maintenance-free, sensors calibrate themselves |
Diagnostics | Integrated diagnostic software, automatic self-test |
SHARKNET® | The SHARKNET® software connects METAL SHARK® metal detectors with a central computer, providing centralized storage of all operating data plus batch and alarm documentation for HACCP and IFS compliance. |
LPW/HPW | Increase of the IP protection class by adapting the sensor seal, installing additional seals and a double housing for the control electronics |
Temperature extension cold | Temperature range extended to -40°C (-40° F) Resin seals remain elastic at low temperatures. Special insulation, heated enclosure and other features. |
Temperature extension hot | Temperature range extended to +55° C, (+131° F) Adapted enclosure, additional thermal insulation, replaceable filter fan, heat exchanger and/or active cooling units. |
High temperature extension for product | Goods temperature up to +120°C (248° F) max. This option provides IP54 grade enclosure for the sensor. |
Signalling devices (optical/acoustic) | Stacking lights and signal horns/sirens available in different versions and IP protection classes |
Sản phẩm tương tự
[button link=”https://drive.google.com/file/d/1vNrtKa6nE96FePk8Lai_RDHN4LDM0NyC/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Sturdy aluminium design – particularly robust and weatherproof with short metal-free zone
Ideal protection for hackers and OSB flakers
High search performance and noise immunity through 4-quadrant technology, even better with Power Drive option
Maintenance-free: automatic calibration and automatic balance control
Easy installation and intuitive operation
Remote control and remote maintenance (option SHARKNET®) with documentation of all settings, metal messages etc.
Features
Aperture width standard up to 2 m x 1.6 m (other sizes on request)
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Easy setup with TeachAssistant
Easy to use with intuitive and multilingual menus
Memory for up to 250 products
Documentation of all events and metal messages
Remote control and remote maintenance via the company network using SHARKNET® software (option)
Extended temperature range down to -40°C / -40°F with specially adapted sensor and specially equipped control unit (option)
4-level password system, automatic logoff after time lapseFunction
The METAL SHARK® BIG with rectangular opening is specially designed for large products such as logs, bales or recycled wood. It detects iron, stainless steel, aluminium etc. precisely and reliably even under difficult conditions.
Thanks to its robust design, it is particularly suitable for industrial use on rough terrain. The typical installation is in a trough conveyor with flat belt, or in a specially prepared vibratory conveyor.
Accessories & Extras
The METAL SHARK® BIG can be perfectly adapted to your production with various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”https://drive.google.com/file/d/1NVMEb_pzVHepcMp42byKw-ntmWa_FuPw/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metal contaminants in liquid and pasty products
Easy to integrate into common pipeline systems, diameter from 1“–6“ / 25-150 mm
Stainless steel housing and frame are easy to clean, supplied tube is CIP-capable (Cleaning In Place)
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation through autocalibration and TeachAsssistant
Function
The METAL SHARK® IN Liquid is developed for liquid and pasty products. With its maintenance-free design and high-quality, hygienic construction, the metal detector is ideal for reliable use in the food industry.
METAL SHARK® IN Liquid can be easily integrated into all common piping systems for pumps, vacuum fillers or even sausage meat filling plants.
Three different valve models, optimally adapted to the respective product, guarantee a safe discharge of metallic contaminants.
[button link=”https://drive.google.com/file/d/1_EXMQDEljiovgIMGoaCQUl6KlE7G9Jp9/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Extremly resistant to weather, dirt or impact of stones and also immune to vibration
Simple and timesaving mounting: belt must not be devided due to a devidable probe
Can be used in the proximitry of frequency converters
Low difference in sensitivity on different sensing heights above the belt
CE-certified
Features
Average sensitivity (from M40 nuts)
Nearly homogeneous sensitivity on the belt and in the upper layers of the product
Can be used close to frequency converters, only 1 m minimum distance between probe and motors or magnets
Passage widths from 1 m to 2.4 m and heights can be adjusted as required
Extremely robust design
Very simple operation
Monitoring and display of internal parameters. (Helpful when calling for telephone support)
Function
The PSQ RA series of metal detector (opterating with a frame-probe) detects all kinds of metal, which means not only iron, but also aluminium, stainless steel, copper or mild steel.
The specialty of this detector is a low difference between edge and center of probe aperture. Therefore it is especially suitable if the depth of burden on the belt is more tan 600 mm. It’s frame can be devided and easily be built around the belt.
This metal detector prevents damage, avoids downtimes and produces significant savings on repair costs.
[button link=”https://drive.google.com/file/d/1CfN0n6N2gAYLPOIjpp5Q_ZFbII4yZMu7/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metals in packaged and unpackaged products on conveyor belts
Removable sides make it particularly easy to install, ideal for conveyors that cannot be split
Highest sensitivity with 4-quadrant technology
Autocalibration and TeachAssistant for intuitive control and easy setup
Maintenance-free due to automatic balance and calibration control
Function
Metal detector METAL SHARK® TU is used in combination with conveyor belts or chutes when they cannot be divided or dismantled. The sidewalls of the TU can be removed so that the sensor plates can be easily pushed over and under the belt.
Thanks to its 4-quadrant technology, it detects magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminum etc.) precisely and reliably. The robust stainless steel housing is easy to clean and robust and therefore suitable for many industries.
Đánh giá
Chưa có đánh giá nào.