PROTECTION FOR CRUSHERS, GRINDERS AND OTHER MACHINES Metal detector PSQ RA
[button link=”https://drive.google.com/file/d/1_EXMQDEljiovgIMGoaCQUl6KlE7G9Jp9/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Extremly resistant to weather, dirt or impact of stones and also immune to vibration
Simple and timesaving mounting: belt must not be devided due to a devidable probe
Can be used in the proximitry of frequency converters
Low difference in sensitivity on different sensing heights above the belt
CE-certified
Features
Average sensitivity (from M40 nuts)
Nearly homogeneous sensitivity on the belt and in the upper layers of the product
Can be used close to frequency converters, only 1 m minimum distance between probe and motors or magnets
Passage widths from 1 m to 2.4 m and heights can be adjusted as required
Extremely robust design
Very simple operation
Monitoring and display of internal parameters. (Helpful when calling for telephone support)
Function
The PSQ RA series of metal detector (opterating with a frame-probe) detects all kinds of metal, which means not only iron, but also aluminium, stainless steel, copper or mild steel.
The specialty of this detector is a low difference between edge and center of probe aperture. Therefore it is especially suitable if the depth of burden on the belt is more tan 600 mm. It’s frame can be devided and easily be built around the belt.
This metal detector prevents damage, avoids downtimes and produces significant savings on repair costs.
Specifications
| Electronics | digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit |
| Input Signals | 1 coaxial cable, probe |
| Output Signals | Metal alarm: 1 relais with 2 floating changeover contacts, switching capacity 230 V 5 A resistive load, switchable between normally relaxed or normally activated mode Fault signal: 1 relais with 2 floating changeover contacts, switching capacity 230 V, 5 A resistive mode |
| Metal Detection | Iron, non-ferrous (e.g. aluminium or copper) und stainless steel |
| Belt widths | 1000 – 2400 mm |
| Protection Type | Control box: IP 55 Frame probe: IP76 |
| Ambience | Control box: -20° C up to +55° C Frame probe: for execution PE up to +60° C, for execution PA6.6 up to +120° C |
| Power Supply | 110-230 V, 50/60 Hz, typ. comsumption 15 VA |
| Material | Control box: steel or stainless steel, grey RAL 7032, electrophoretic dipcoating Frame probe: stainless u-structure steel Support for mounting: PE or PA6.66 |
Sản phẩm tương tự
[button link=”https://drive.google.com/file/d/1vNrtKa6nE96FePk8Lai_RDHN4LDM0NyC/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Sturdy aluminium design – particularly robust and weatherproof with short metal-free zone
Ideal protection for hackers and OSB flakers
High search performance and noise immunity through 4-quadrant technology, even better with Power Drive option
Maintenance-free: automatic calibration and automatic balance control
Easy installation and intuitive operation
Remote control and remote maintenance (option SHARKNET®) with documentation of all settings, metal messages etc.
Features
Aperture width standard up to 2 m x 1.6 m (other sizes on request)
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Easy setup with TeachAssistant
Easy to use with intuitive and multilingual menus
Memory for up to 250 products
Documentation of all events and metal messages
Remote control and remote maintenance via the company network using SHARKNET® software (option)
Extended temperature range down to -40°C / -40°F with specially adapted sensor and specially equipped control unit (option)
4-level password system, automatic logoff after time lapseFunction
The METAL SHARK® BIG with rectangular opening is specially designed for large products such as logs, bales or recycled wood. It detects iron, stainless steel, aluminium etc. precisely and reliably even under difficult conditions.
Thanks to its robust design, it is particularly suitable for industrial use on rough terrain. The typical installation is in a trough conveyor with flat belt, or in a specially prepared vibratory conveyor.
Accessories & Extras
The METAL SHARK® BIG can be perfectly adapted to your production with various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”https://drive.google.com/file/d/1sv7Lc5iq67BWyie6fm4VeOwYEc1Sxboo/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metals in packaged and unpackaged products on conveyor belts
High sensitivity in dry, moist, salty or frozen goods with 3D detection
Easy setup and intuitive operation due to auto-calibration and TeachAssistant
Maintenance-free design with the automatic and continuous calibration of detector coils
BRC-Kit option: Conformity with the Global Standard of the British Retail Consortium (BRC) for food safety
Special models: UltraSens for even better sensitivity or Twinhead model to overcome orientation effects
[button link=”https://drive.google.com/file/d/1pkXkZ1Tdbz1a3SX90FU7l4mfUz981Nja/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGt[/button]
Detects metal contaminants in small, free-falling products such as hygiene articles
Highest accuracy in the detection of magnetic and non-magnetic metal contaminants
FDA conformity of all parts in contact with the product
Hygienic design for use in the hygiene, pharmaceutical or food industry
Intuitive control, auto-calibration and TeachAssistant
Features
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Storage spaces for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
IFS and HACCP reports available on the display at the touch of a button
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® R offers the highest performance in detecting magnetic and non-magnetic metals. Typical applications are found in the medical-pharmaceutical sector as well as in the sanitary or food industry and for all kinds of chemical powders.
The product falls through the R sensor head and an optional reject unit. With the reject unit the smallest metal objects are promptly ejected from the flow of goods. Metal particles are automatically rejected.
The reject unit is suitable for tube diameter 10 to 50 mm, Reject timing is automatically by metal detector control box. Pneumatically driven.
The hygienic housing is easy to clean, all materials in contact with the product are FDA-approved quality (PTFE and stainless steel).
[button link=”https://drive.google.com/file/d/1b7OBWPwwl17y7OM3o7M1bFgPnmPcKDH9/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Specially designed for the monitoring of wood, fibre boards or any wide but thin product
AutoSens technology for automatic adjustment of the sensitivity to the mat height
Maintenance-free with automatic balance and calibration control
Durable aluminium design: particularly robust and easy to clean
Highest sensitivity with 4-quadrant technology
Autocalibration and Teach Assistant for intuitive control and easy installation
Features
Aperture widths from 1 m to 5 m as a standard (further sizes on request)
Maximum search performance with hig-hest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Easy to use with intuitive and multilingu-al menus
Memory for up to 250 products
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® BIG pba with rectangular opening at a rather low opening height is especially designed for monitoring fibre mats, MDF, OSC or chipboard as well as other panel materials.
The typical installation takes place around a conveyor belt with flat belt.
Using 3D detection technology, it detects magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminium etc.) precisely and reliably even under difficult conditions.
Accessories & Extras
The METAL SHARK® BIG pba can be perfectly adapted to your production with various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
Đánh giá
Chưa có đánh giá nào.