PROTECTION FOR CRUSHERS, GRINDERS AND OTHER MACHINES Metal detector PSQ RA
[button link=”https://drive.google.com/file/d/1_EXMQDEljiovgIMGoaCQUl6KlE7G9Jp9/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Extremly resistant to weather, dirt or impact of stones and also immune to vibration
Simple and timesaving mounting: belt must not be devided due to a devidable probe
Can be used in the proximitry of frequency converters
Low difference in sensitivity on different sensing heights above the belt
CE-certified
Features
Average sensitivity (from M40 nuts)
Nearly homogeneous sensitivity on the belt and in the upper layers of the product
Can be used close to frequency converters, only 1 m minimum distance between probe and motors or magnets
Passage widths from 1 m to 2.4 m and heights can be adjusted as required
Extremely robust design
Very simple operation
Monitoring and display of internal parameters. (Helpful when calling for telephone support)
Function
The PSQ RA series of metal detector (opterating with a frame-probe) detects all kinds of metal, which means not only iron, but also aluminium, stainless steel, copper or mild steel.
The specialty of this detector is a low difference between edge and center of probe aperture. Therefore it is especially suitable if the depth of burden on the belt is more tan 600 mm. It’s frame can be devided and easily be built around the belt.
This metal detector prevents damage, avoids downtimes and produces significant savings on repair costs.
Specifications
| Electronics | digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit |
| Input Signals | 1 coaxial cable, probe |
| Output Signals | Metal alarm: 1 relais with 2 floating changeover contacts, switching capacity 230 V 5 A resistive load, switchable between normally relaxed or normally activated mode Fault signal: 1 relais with 2 floating changeover contacts, switching capacity 230 V, 5 A resistive mode |
| Metal Detection | Iron, non-ferrous (e.g. aluminium or copper) und stainless steel |
| Belt widths | 1000 – 2400 mm |
| Protection Type | Control box: IP 55 Frame probe: IP76 |
| Ambience | Control box: -20° C up to +55° C Frame probe: for execution PE up to +60° C, for execution PA6.6 up to +120° C |
| Power Supply | 110-230 V, 50/60 Hz, typ. comsumption 15 VA |
| Material | Control box: steel or stainless steel, grey RAL 7032, electrophoretic dipcoating Frame probe: stainless u-structure steel Support for mounting: PE or PA6.66 |
Sản phẩm tương tự
[button link=”#” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]Replace This Text[/button]
Modular conveyor HQ – optimally adapted to use with metal detector METAL SHARK® BD
100% stainless steel – stable construction and easy to clean
Different belt types and various ejection systems for every application, FDA compliant and heat resistant up to 120° C
Accessories such as railing, lights, covers, light sensors can be added individually
BRC-Kit: Conformity with all current standards for machines in the food industry
Function
The HQ conveyor belts are combined with METAL SHARK® BD metal detectors and are mainly adapted to the requirements of the food industry.
The white PU belt is FDA compliant and can be removed in just a few steps. The belt and the stable stainless steel frame can be cleaned easily and quickly and thoroughly.
HQ is a modular system witk a huge variaty of belt types an sizes, rejection systems, railings or coverages.
[button link=”https://drive.google.com/file/d/1av4SiQqk3SbIiPmpV_eQM_-SdkUCAEfJ/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Monitors bulk materials in the mining and building materials industry
Self-adjusting and extremely easy to install
High-quality components ensure reliability and long service life
Detects ferrous and non-ferrous metals, iron oxide and ore are ignored
Probe and amplifier are immune to vibration and resistant to weather, dirt and stone chips
Sturdy aluminium design: particularly robust and easy to clean
Features
High sensitivity (M6 nuts) at belt speed of 0.1 – 4 m/s
Very simple operation
Can be used near frequency converters, only 1 m minimum distance between probe and motors or magnets
Monitoring and display of internal para-meters
Optional: Realization as tandem for higher debris heights
Optional: complete blanking of magneti-te Fe304
Function
The SQ and SQTA metal detectors offer good metal sensitivity for monitoring bulk materials in the mining and construction industry.
They are extremely durable, insensitive to vibrations and resistant to weather, dirt or stone chips. They are easy to install, handle and maintain.
Both are available for belt widths from 500 mm to 1,200 mm. At a belt speed of 0.1 – 4.0 m/s they can easily detect metal parts of the size of about M6 nuts and larger.
For a higher belt speed (M10 nuts) at a belt speed of max. 4.0 m/s we recommend the metal detectors SQ and SQTA.
[button link=”#” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]Replace This Text[/button]
Reliably detects metals in free-falling goods even with limited space
Simple assembly due to mounting frame and quick release rings
Highest sensitivity with 4-quadrant technology
Autocalibration and TeachAssistant for intuitive control and easy setup
Maintenance-free through automatic balance and calibration control
BRC-Kit option: Conformity with the Global Standard of the British Retail Consortium (BRC) for food safety
Function
METAL SHARK® GF (Gravity Feed) is used for pipelines with free-falling products to detect metal contaminations in continuously flowing granulates or powders such as sugar, flour, grain or spices. The sensitive sensors detect even the smallest metal contaminants, and fast-switching separation flaps remove them directly from the product stream during ongoing production.
[button link=”https://drive.google.com/file/d/1NVMEb_pzVHepcMp42byKw-ntmWa_FuPw/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metal contaminants in liquid and pasty products
Easy to integrate into common pipeline systems, diameter from 1“–6“ / 25-150 mm
Stainless steel housing and frame are easy to clean, supplied tube is CIP-capable (Cleaning In Place)
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation through autocalibration and TeachAsssistant
Function
The METAL SHARK® IN Liquid is developed for liquid and pasty products. With its maintenance-free design and high-quality, hygienic construction, the metal detector is ideal for reliable use in the food industry.
METAL SHARK® IN Liquid can be easily integrated into all common piping systems for pumps, vacuum fillers or even sausage meat filling plants.
Three different valve models, optimally adapted to the respective product, guarantee a safe discharge of metallic contaminants.
Đánh giá
Chưa có đánh giá nào.