METAL DETECTION FOR TEXTILES, FLEECE AND WEBS METAL SHARK® FL & FL compact
[button link=”https://drive.google.com/file/d/1pS1Pxrb6doSbkfP_j2Ie7mXJ7N1TkrxH/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects magnetic and non-magnetic metals in fabrics and webs
Particularly flat for optimal approach to ascending or descending product paths, FL compact additionally rotatable
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Maintenance-free with automatic balance and calibration control
Features
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
IFS and HACCP reports easily available on the display at the touch of a button
Cyclical function monitoring with Performance Validation System (PVS)
Optionally: Data transfer to USB interface or connection to the company net-work via SHARKNET® softwareFunction
The METAL SHARK® FL and FL compact metal detectors are usually used for the inspection of nonwovens, textiles and films.
Both detectors are particularly flat and available in widths of 1,000 – 4,000 mm. The FL compact is rotatably mounted so that it can also be adapted to sloping webs.
Due to the high sensitivity of the FL models, tiny magnetic and non-magnetic metal particles (e.g. iron, aluminium and stainless steel) are detected over the entire width.
Specifications
Electronics | Digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit |
Input | 2 analogue 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons |
Output | 2 floating: “error” and “metal” 8 freely configurable 24 V DC signals |
Inspection method | High-frequency magnetic field, multi-channel operation, balanced receiver coils |
Metal detection | Ferrous, non-ferrous (e.g. aluminium, lead etc.) and stainless steel |
Product compensation | 250 memory locations, automatic product compensation, with TeachAssistant |
Enclosure rating | Controller IP65, sensor IP54 (optionally IP66) |
Environmental conditions | Controller: -20°C to +40°C / -4°F to +104°F, optionally to -40°C / -40°F or +55°C / 131°F, rel. humidity 20% to 90% (non-condensing) Sensor: -30°C to +60°C / -22°F to 140°F, optionally up to +90°C / 194°F |
Temperature of goods inspected | Standard: -30°C to +40°C /-22°F to +104°F Optionally: -40°C to +60°C / -40°F to 140°F |
Power Supply | 1 phase 110-230 V AC +/- 5%, 20 W typ. (60 W max.) |
Interface | RS232, LAN (optional, for SHARKNET®), USB (optional) |
Maintenance | Maintenance-free, sensors calibrate themselves |
Diagnostics | Integrated diagnostic software, automatic self-test |
SHARKNET® | The SHARKNET® software connects METAL SHARK® metal detectors with a central computer, providing centralized storage of all operating data plus batch and alarm documentation for HACCP and IFS compliance. |
LPW/HPW | Increase of the IP protection class by adapting the sensor seal, installing additional seals and a double housing for the control electronics |
Temperature extension cold | Temperature range extended to -40°C (-40° F) Resin seals remain elastic at low temperatures. Special insulation, heated enclosure and other features. |
Temperature extension hot | Temperature range extended to +55° C, (+131° F) Adapted enclosure, additional thermal insulation, replaceable filter fan, heat exchanger and/or active cooling units. |
High temperature extension for product | Goods temperature up to +120°C (248° F) max. This option provides IP54 grade enclosure for the sensor. |
Signalling devices (optical/acoustic) | Stacking lights and signal horns/sirens available in different versions and IP protection classes |
Sản phẩm tương tự
[button link=”#” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]Replace This Text[/button]
Reliably detects metals in free-falling goods even with limited space
Simple assembly due to mounting frame and quick release rings
Highest sensitivity with 4-quadrant technology
Autocalibration and TeachAssistant for intuitive control and easy setup
Maintenance-free through automatic balance and calibration control
BRC-Kit option: Conformity with the Global Standard of the British Retail Consortium (BRC) for food safety
Function
METAL SHARK® GF (Gravity Feed) is used for pipelines with free-falling products to detect metal contaminations in continuously flowing granulates or powders such as sugar, flour, grain or spices. The sensitive sensors detect even the smallest metal contaminants, and fast-switching separation flaps remove them directly from the product stream during ongoing production.
[button link=”https://drive.google.com/file/d/1av4SiQqk3SbIiPmpV_eQM_-SdkUCAEfJ/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Monitors bulk materials in the mining and building materials industry
Self-adjusting and extremely easy to install
High-quality components ensure reliability and long service life
Detects ferrous and non-ferrous metals, iron oxide and ore are ignored
Probe and amplifier are immune to vibration and resistant to weather, dirt and stone chips
Sturdy aluminium design: particularly robust and easy to clean
Features
High sensitivity (M6 nuts) at belt speed of 0.1 – 4 m/s
Very simple operation
Can be used near frequency converters, only 1 m minimum distance between probe and motors or magnets
Monitoring and display of internal para-meters
Optional: Realization as tandem for higher debris heights
Optional: complete blanking of magneti-te Fe304
Function
The SQ and SQTA metal detectors offer good metal sensitivity for monitoring bulk materials in the mining and construction industry.
They are extremely durable, insensitive to vibrations and resistant to weather, dirt or stone chips. They are easy to install, handle and maintain.
Both are available for belt widths from 500 mm to 1,200 mm. At a belt speed of 0.1 – 4.0 m/s they can easily detect metal parts of the size of about M6 nuts and larger.
For a higher belt speed (M10 nuts) at a belt speed of max. 4.0 m/s we recommend the metal detectors SQ and SQTA.
[button link=”https://drive.google.com/file/d/1pkXkZ1Tdbz1a3SX90FU7l4mfUz981Nja/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOGt[/button]
Detects metal contaminants in small, free-falling products such as hygiene articles
Highest accuracy in the detection of magnetic and non-magnetic metal contaminants
FDA conformity of all parts in contact with the product
Hygienic design for use in the hygiene, pharmaceutical or food industry
Intuitive control, auto-calibration and TeachAssistant
Features
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Storage spaces for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
IFS and HACCP reports available on the display at the touch of a button
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® R offers the highest performance in detecting magnetic and non-magnetic metals. Typical applications are found in the medical-pharmaceutical sector as well as in the sanitary or food industry and for all kinds of chemical powders.
The product falls through the R sensor head and an optional reject unit. With the reject unit the smallest metal objects are promptly ejected from the flow of goods. Metal particles are automatically rejected.
The reject unit is suitable for tube diameter 10 to 50 mm, Reject timing is automatically by metal detector control box. Pneumatically driven.
The hygienic housing is easy to clean, all materials in contact with the product are FDA-approved quality (PTFE and stainless steel).
[button link=”https://drive.google.com/file/d/1wjvs2KFI53sP61JXj7DxrA6o_QDFk4pW/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
System solution consisting of metal detector METAL SHARK® BD and Conveyor HW
Disassembled in a few easy steps – ideal for daily hose cleaning
Removable PU belt is FDA compliant
Stable frame construction made of 100% stainless steel
Very cost-efficient and easy to integrate into existing conveyor lines
Function
The HW series conveyor belts are combined as standard with METAL SHARK® BD metal detectors and are mainly adapted to the requirements of the food industry.
The white PU belt is FDA compliant and can be removed in just a few steps. The belt and the stable stainless steel frame can be cleaned easily and quickly.
Đánh giá
Chưa có đánh giá nào.