METAL DETECTION FOR TEXTILES, FLEECE AND WEBS METAL SHARK® FL & FL compact
[button link=”https://drive.google.com/file/d/1pS1Pxrb6doSbkfP_j2Ie7mXJ7N1TkrxH/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects magnetic and non-magnetic metals in fabrics and webs
Particularly flat for optimal approach to ascending or descending product paths, FL compact additionally rotatable
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Maintenance-free with automatic balance and calibration control
Features
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Memory for up to 250 products
Easy to use with intuitive and multilingual menus
4-level password system, automatic log out after time lapse
Documentation of all events and metal messages
IFS and HACCP reports easily available on the display at the touch of a button
Cyclical function monitoring with Performance Validation System (PVS)
Optionally: Data transfer to USB interface or connection to the company net-work via SHARKNET® softwareFunction
The METAL SHARK® FL and FL compact metal detectors are usually used for the inspection of nonwovens, textiles and films.
Both detectors are particularly flat and available in widths of 1,000 – 4,000 mm. The FL compact is rotatably mounted so that it can also be adapted to sloping webs.
Due to the high sensitivity of the FL models, tiny magnetic and non-magnetic metal particles (e.g. iron, aluminium and stainless steel) are detected over the entire width.
Specifications
| Electronics | Digital signal processor, noise filter, digital balance control, digital frequency control, PowerDrive circuit |
| Input | 2 analogue 0…10 V DC (option: 4-20 mA) 8 freely configurable 24 V DC signals, e.g. for encoders, product recognition, buttons |
| Output | 2 floating: “error” and “metal” 8 freely configurable 24 V DC signals |
| Inspection method | High-frequency magnetic field, multi-channel operation, balanced receiver coils |
| Metal detection | Ferrous, non-ferrous (e.g. aluminium, lead etc.) and stainless steel |
| Product compensation | 250 memory locations, automatic product compensation, with TeachAssistant |
| Enclosure rating | Controller IP65, sensor IP54 (optionally IP66) |
| Environmental conditions | Controller: -20°C to +40°C / -4°F to +104°F, optionally to -40°C / -40°F or +55°C / 131°F, rel. humidity 20% to 90% (non-condensing) Sensor: -30°C to +60°C / -22°F to 140°F, optionally up to +90°C / 194°F |
| Temperature of goods inspected | Standard: -30°C to +40°C /-22°F to +104°F Optionally: -40°C to +60°C / -40°F to 140°F |
| Power Supply | 1 phase 110-230 V AC +/- 5%, 20 W typ. (60 W max.) |
| Interface | RS232, LAN (optional, for SHARKNET®), USB (optional) |
| Maintenance | Maintenance-free, sensors calibrate themselves |
| Diagnostics | Integrated diagnostic software, automatic self-test |
| SHARKNET® | The SHARKNET® software connects METAL SHARK® metal detectors with a central computer, providing centralized storage of all operating data plus batch and alarm documentation for HACCP and IFS compliance. |
| LPW/HPW | Increase of the IP protection class by adapting the sensor seal, installing additional seals and a double housing for the control electronics |
| Temperature extension cold | Temperature range extended to -40°C (-40° F) Resin seals remain elastic at low temperatures. Special insulation, heated enclosure and other features. |
| Temperature extension hot | Temperature range extended to +55° C, (+131° F) Adapted enclosure, additional thermal insulation, replaceable filter fan, heat exchanger and/or active cooling units. |
| High temperature extension for product | Goods temperature up to +120°C (248° F) max. This option provides IP54 grade enclosure for the sensor. |
| Signalling devices (optical/acoustic) | Stacking lights and signal horns/sirens available in different versions and IP protection classes |
Sản phẩm tương tự
[button link=”#” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]Replace This Text[/button]
Reliably detects metals in free-falling goods even with limited space
Simple assembly due to mounting frame and quick release rings
Highest sensitivity with 4-quadrant technology
Autocalibration and TeachAssistant for intuitive control and easy setup
Maintenance-free through automatic balance and calibration control
BRC-Kit option: Conformity with the Global Standard of the British Retail Consortium (BRC) for food safety
Function
METAL SHARK® GF (Gravity Feed) is used for pipelines with free-falling products to detect metal contaminations in continuously flowing granulates or powders such as sugar, flour, grain or spices. The sensitive sensors detect even the smallest metal contaminants, and fast-switching separation flaps remove them directly from the product stream during ongoing production.
[button link=”https://drive.google.com/file/d/15w4V_2y1W2CO0PSFPNBXqUt865Q2KS0E/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Optimally adapted to the monitoring of entire tree trunks
Sensor diameter up to 1.8 m (further sizes on request)
Sturdy stainless steel design: particularly robust and with short metal-free zone
Maintenance-free with automatic balance and calibration control
Sturdy stainless steel design: particularly robust and with short metal-free zone
Highest sensitivity with 4-quadrant technology
Intuitive control and easy installation with autocalibration and TeachAssistant
Features
Sensor diameter up to 1.8 m (further sizes on request)
Robust against environmental influences such as high and low temperatures
Maximum detection performance with highest reliability in the entire detection area due to 4-quadrant technology
Simple setup with TeachAssistant
Easy to use with intuitive and multilingual menus
Memory for up to 250 products
Maintenance-free with Autocalibration
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
4-level password system, automatic log out after time lapse
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® OCTA has been developed for industrial applications in the timber industry and sawmills. It detects magnetic and non-magnetic metal contaminants (iron, tombac, brass, stainless steel, etc.) precisely and reliably even under difficult conditions.
The octagonal shape makes it ideal for monitoring logs for metal parts such as shrapnel, bullet fragments, nails, screws, etc.
It is typically installed in troughed conveyor belts.
Accessories & Extras
The METAL SHARK® OCTA can be perfectly adapted to your production by various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”https://drive.google.com/file/d/1nTbasET5JEROGNC7FQ7W5ay-GZL3HboW/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Perfectly suited to the monitoring of entire timber logs
Sturdy aluminium design
particularly robust, weatherproof, with short metal-free zone
Highest detection performance and noise immunity
4-quadrant technology, Power Drive option
Maintenance-free
automatic calibration and automatic balance control
Easy installation and intuitive operation
Remote control and remote maintenance (SHARKNET® option) with documentation of all settings, metal alarms etc.
Features
Standard opening width up to 1.6 m (other sizes on request)
Maximum search performance with hig-hest reliability in the entire detection area due to 4-quadrant technology
Maintenance-free with automatic balance and calibration control
Simple setup with TeachAssistant
Easy to use with intuitive and multilingual menus
Memory for up to 250 products
Documentation of all events and metal messages
Optional: Data transfer to USB interface or connection to the company network via SHARKNET® software
Extended temperature range down to -40°C with specially adapted sensor and specially equipped control unit (option)
4-level password system, automatic log out after time lapse
Cyclical function monitoring with Performance Validation System (PVS)
Function
The METAL SHARK® BIG RD has been developed directly for industrial applications in the timber industry and sawmills.
The detector detects magnetic and non-magnetic metal contaminants (iron, tombac, brass, stainless steel, etc.) precisely and reliably even under difficult conditions.
Due to its round shape it is ideal for monitoring logs for metal parts such as shrapnel, bullet fragments, nails, screws, etc.
It is typically installed in troughed conveyor belts.
Accessories & Extras
The METAL SHARK® BIG RD can be perfectly adapted to your production by various special designs and accessories.
Different temperature requirements are taken into account as well as complicated product requirements for metal detection.
[button link=”https://drive.google.com/file/d/1sv7Lc5iq67BWyie6fm4VeOwYEc1Sxboo/view?usp=sharing” target=”_blank” color=”default” shape=”rounded” size=”small” align=”left”]CATALOG[/button]
Reliably detects metals in packaged and unpackaged products on conveyor belts
High sensitivity in dry, moist, salty or frozen goods with 3D detection
Easy setup and intuitive operation due to auto-calibration and TeachAssistant
Maintenance-free design with the automatic and continuous calibration of detector coils
BRC-Kit option: Conformity with the Global Standard of the British Retail Consortium (BRC) for food safety
Special models: UltraSens for even better sensitivity or Twinhead model to overcome orientation effects
Đánh giá
Chưa có đánh giá nào.